Question about 1996 Chevrolet Blazer
Fuel pump went out and was replaced but then gas gage did not work
Someone will need to check the circuit at the gas tank, the sending unit next to the pump grounds the gauge on the dash. You should have a voltage reference at the tank from the gauge.
Posted on Jan 04, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuel pump problem 1991 s-10 2.8
Sounds like the Vehicle is POSESTED LoL ,
I would Hardwire a Key on wire around the origanal wires. Fuel Pump IS NOT going to set a Trouble Code at all ever, as it is an electrical component like headlights, as for the missfiring & guage reading above full I see nothing in commen with the 2 as long as the Supply and return hoses are
not swaped witch they cant be because it wouldnt run (thinking on keyboard) LoL-- Also check Fuel presure regulator. Hope this Helps you.
Posted on Jan 09, 2009
hi its rob was it running befor u replaced the pump if its petrol take out the spark plugs maken sure not to mess up the timeing give them a clean .if its deizil prime the system o open the injectors
Posted on Apr 26, 2009
Before spending several hundres on a fuel pump, I recommend doing a fuel pressure test. You can get a test gauge pretty cheap at a parts store. If the pump is junk, you raise the truck, lower the fuel tank, unplug the electronics from the pump at the top of the tank, then with a hammer and flat head scrwedrive, gently tap the lock ring in a counter clockwise direction until it pops off. Pull the pump assembly out and install the new one. Reverse directions to install.
Posted on Jun 02, 2009
I had the same problem in my 91' s10 blazer. Drain the tank, then put about 5 gallons of premium gas. After that put fuel system cleaner and sea foam in the tank. Let it sit their for about an hour. try to crank up the car (you might have to put gas right on the carb until the gas in the tank gets to the engine). If that dose not work you might want to take it to a shop and have them clean the fuel system by hand. It might also be the fuel sensor. I hope this helped also up date us on other problems and if any of our suggestions have helped.
Posted on Jul 19, 2009
Tips for a great answer:
Jan 30, 2014 | Cars & Trucks
Feb 27, 2013 | 2002 Chevrolet Blazer
Dec 20, 2012 | 1998 Chevrolet Blazer
Apr 19, 2011 | 1997 Chevrolet Blazer
Mar 01, 2011 | 2002 Chevrolet Blazer
Apr 30, 2010 | 1986 Chevrolet S-10 Blazer
Apr 15, 2009 | 1998 Chevrolet Blazer
149 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: