Question about 1985 Oldsmobile Cutlass Supreme

Open Question

How do i replace a hazard switch on a 1986 cutlass supreme steering column

Hazard switch on steering column broken need to replace it.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 291 Answers

SOURCE: 96 cutlass supreme with steering column issues

you can jump out the security.. you can not trade out chips...you can try a relearn process.. as follows.. turn ignition on for ten minutes do not crank. after ten minutes turn key off then right back on for another 10 minutes...then one more time off then back on for ten minutes..then off hen try to crank.. if car starts then done.. if not send me email for way to jump out ignition.. kbutlrtech at yah00.com

Posted on Jan 03, 2010

  • 133 Answers

SOURCE: Replace Hazard Light Switch on Steering column.

The steering wheel will need to come of and pull the turn signal switch out as a unit.

Posted on Nov 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ALL REAR LIGHTS DONT WORK ON A 1986 OLDSMOBILE CUTLASS


Check fuses make sure that the steering column connector is plugged in. Stop, turn signal and Hazzard lights go through the turn signal switch

Feb 01, 2014 | 1986 Oldsmobile Cutlass Supreme

1 Answer

I don't know where to plug in the flasher relay for my turning lights


1986 Oldsmobile Cutlass 5.0L 4BL OHV 8cyl to find the FLASHER...

The Flasher is located: Front seating area, driver side, under dash, passenger side of steering column, mounted behind instrument cluster.

Hope helps.

Mar 11, 2011 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Replace Hazard Light Switch on Steering column. 1994 Oldsmobile Cutlass Supreme


The steering wheel will need to come of and pull the turn signal switch out as a unit.

Nov 05, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Fix a flasher


Replacement The turn signal flasher is located under the dash either to the left or right of the steering column on most models. The lower dash panel may have to be removed to gain access to the unit. The hazard flasher is located in the fuse block.On 1980 and later models, both the turn signal flasher and the hazard flasher are located at the lower left hand and the upper right hand corners of the fuse block respectively. Remove these by pulling them from their connectors.


Mar 06, 2010 | 1986 Oldsmobile Cutlass Supreme

2 Answers

1994 oldsmobile cutlass supreme sl the fuse box for signal lights


the fuse box will be in 1 of 3 places (1)glovebox (2)under dash by drivers foot kick panel or (3) under hood .

Nov 21, 2009 | 1993 Oldsmobile Cutlass Supreme

2 Answers

Turn signals don't work at all


Well if it isnt the fuse or the blinker relays then it is gonna be the multifunctional switch. This controls your headlights, blinkers, hazards, cruise control, and wipers. To find out if this is bad turn the if=gnition on and turn a blinker on then depress your hazard switch, if the start to flash then the switch is bad and needs replaced. About 150 at a parts store. And the blinker relays are located under the drivers side dash. One on either side of the steering column. Look for a little silver round relay that is about 2 inch in diameter...should day 552 on it. The hard to reach one is on the right side of the column and is towards the back tucked in a little.

Oct 30, 2009 | 1997 Oldsmobile Cutlass Supreme

2 Answers

Brake lights


the switch in the steering column is broken. you will need to replace it. the contacts are separating when signal arm is moved.

Sep 17, 2009 | 1997 Oldsmobile Cutlass Supreme

1 Answer

I need to replace turn signal switch on 97 olds cutlass supreme.


Disconnect the battery to do any service on the steering column or front radiator areas.

Jun 30, 2009 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Hazard/turn signal switch


need to replace the whole switch/stick at steering column.

Jun 03, 2009 | 1994 Oldsmobile Cutlass Supreme

3 Answers

1994 oldsmobile supreme.wont start


could be neautral safety switch ours does this and we have to pull it out of park and put it back into park or hold the shifter lever up while turning the key the sec light should go out if it starts. ours does.

Jan 10, 2009 | 1994 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1985 Oldsmobile Cutlass Supreme Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...