Question about 2003 Ford Expedition

Open Question

P0306 cylinder 6 misfire

P0306 misfire 1st 1000 revs

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: my 2005 ford escape will not start... problem

Swap the coil pack with another cylender. If the error code follows the coil pack then replace the coilpack.

Posted on Jul 15, 2009

Ad
  • 82 Answers

SOURCE: ford e 150 4.2 Misfire cylinder 6

do a compression test, you may have a bend valve , I'm assuming its not getting overheating so I don't think its the head gasket..a compression test can give you the answer..hope this was very helpful...thanks

Posted on Aug 08, 2009

bschilz
  • 2049 Answers

SOURCE: engine light code P1507:

P1507 is "Idle Air Control System Underspeed Error". This code indicates a problem with the Idle Air Control (IAC) valve assembly, harness wiring for the IAC or the Powertrain Control Module. So checking the IAC next is the most logical step.

Posted on Oct 07, 2009

rogrrabbit
  • 986 Answers

SOURCE: car runs good for about 15 minutes then it starts

its bad fuel injectors. I would do all of them at once its better and cheaper in the long run.

Posted on May 30, 2010

  • 56 Answers

SOURCE: 2003 Ford Taurus cylinder misfire #1 and #5 code

sounds like your wires are switched around. have replaced the plugs lately

Posted on Oct 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't my car start?


P0300 multiple misfire
P0302 misfire cylinder 2
P0306 misfire cylinder 6

Apr 25, 2015 | Cars & Trucks

1 Answer

I would like to know what these codes mean


P0171 System Too Lean (Bank 1)
P0174 System Too Lean (Bank 2)
P0301 Cylinder #1 Misfire Detected
P0302 Cylinder #2 Misfire Detected
P0304 Cylinder #4 Misfire Detected
P0306 Cylinder #6 Misfire Detected

Mar 12, 2014 | 1999 Ford Explorer

1 Answer

I have a 2007 ford taurus with p0300-p0303, p0306, p0316, p2195 and p2196. engine doesnt start anymore but battery is fine.


The old give me money for nothing statement from a mechanic instead of knowing how to fix it.
code p0300 refers to random/ multiple cylinder/s misfire detected===causes--spark plug/s---HT lead/s---injector/s---ignition coil/s--low compression--wiring
code po303 refers to cylinder 3 misfire detected--- engine mechanical fault---wiring---ignition/ fuel system---injector --ECT/MAF sensor --- ECM
code p0306 refers to cylinder 6 misfire detected===causes --engine mechanical fault---wiring---ignition / fuel system---injector ---ECT/MAF sensor---ECM
code po316 refers to misfire detected during start up--first 1000 revs==causes--engine mechanical fault---wiring---ignition /fuel system---injector
code po2195 refers to heated oxygen sensor (HO2S) 1 bank 1 signal stuck lean===cayses ---HO2S---fuel pressure---injectors---intake leak
it also refers to O2S sensor 1 bank 1 same causes and also refers to HO2S 1 bank 1 implausible signal===causes --- short to positive---short to ground---Ho2S ---ECM
code po2196 refers to the same items as 2195 . some causes are also air intake restricted
Have a compression test done some where else and it will indicate the condition of the motor. The rest is sensors and wiring problems.

Jan 05, 2014 | Cars & Trucks

2 Answers

2004 trailblazer code po306 and we changed out plugs, coil and still po306


Diagnostic Test Code (DTC) P0306 is defined by SAE J2012 (REV, DEC 2007) as "Cylinder 6 Misfire Detected".

To put it plain and simple, there is a problem with cylinder #6 in your engine that is causing it to misfire.

Misfires can be caused by several things. One of the things that must be understood is that a misfire is simply one or more cylinders that are not producing the power that they should. - especially when compared to other cylinders in the same engine.
The things that can cause this include, but are not limited to:
> Ignition system
> Fuel delivery system
> Fuel injection system
> Cylinder compression (which can be affected by many of the things below)
> blown head gasket
> Burned or bent valves
> Vacuum leaks
> Faulty wiring
> cracked piston or broken piston rings
> Restricted exhaust
> malfunctioning Powertrain/Engine Control Module (PCM or ECM)


To fix the code, you must first diagnose to determine which of these things is causing the misfire, then repair accordingly.

Mar 23, 2012 | Chevrolet TrailBlazer Cars & Trucks

1 Answer

P0306 and P0316


Okay, you were getting code P0306, and a P0316. You have replaced plugs and swapped coils around are you still getting the code P0306? or is it a different code for a different cylinder now? Replacing your crankshaft position sensor in this case will merely waste your money. Its doing its job, the P0316 is telling you you had a misfire in the first 1000 revolutions of your engine at startup, the P0306 is telling you its probably cylinder #6 that had the problem. there is no code there indicating your CKP is bad.

Now if you swapped your coils and the misfire is still on cylinder 6, its either injector problem, or base engine. If the misfire has moved to another cylinder, replace that COP.

Hope helps.

Mar 21, 2012 | 2005 Mazda Tribute

2 Answers

2002 ford escape 3.0L DTC P0305and P0306 what would you ck


P0305 - Cylinder 5 Misfire Detected
P0306 - Cylinder 6 Misfire Detected

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, The Powertrain Control Module (PCM) or Electronic Control Module (ECM) can determine that a misfire is occurring.

When is the code detected?
- Engine Cylinder #5 and #6 is Misfiring.

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation

Possible Causes:
- Improper spark plug at cylinder #5 and #6
- Insufficient compression at cylinder #5 and #6
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #5 and #6
- Fuel injector #5 and #6 may be faulty
- Intake air leak at cyli

Possible Solution:
- Perform Injector Service
- Replaced Spark Plug #5 and #6
- Replaced Injector #5 and #6
- Replaced Ignition Coil #5 and #6

Hope helps.

Jan 02, 2011 | Ford Escape Cars & Trucks

2 Answers

Cylinder 1 misfire code p0301


kenracer yes our codes p0301 and p0306 is the #1 and #6 misfire

Jul 28, 2008 | Ford Taurus Cars & Trucks

Not finding what you are looking for?
2003 Ford Expedition Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

fordexpert

Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...