Question about 2007 Toyota 4Runner
Vsc trac and check engine light came on 2 days ago but have gone away. put code reader and p0441 came up.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
to reset for a momentany malfuntion,disconnect the negative battery terminal few minutes, reconnect,start engine and drive to check
Posted on May 03, 2009
SOURCE: Check engine and VSC lights on
that the check engine light is on indicates a problem. that the light is not flashing indicates that the computer does not think that the problem is all that bad. without some other vehicle malfunction symptoms best advice i can give you is to take your vehicle to a place that has a code reader and see what codes it has stored. some car parts stores will retrieve the codes for free, idea being that the parts store can then sell you some parts to fix the problem. but you don't have to buy anything, you can just have them read the codes. some of the parts stores will give you a printout of the codes too. get the codes and you know what the computer is not liking, then you can make a more informed decision about what to do next. hope that helps.
Posted on May 28, 2009
Those lights always come on whenever the check engine light is on.It could be from the gas cap not being tight enough or an air hose in the engine compartment coming loose. I recommend bringing your vehicle to someone that can read the codes and reset the lights for you. The codes will narrow down what the problem really is.
Posted on Jul 20, 2009
It is not hard to change the sensor, it just screws into a threaded hole. The light will not go out immeditaly, after the sensor is replaced. It needs to go thru a drive cycle. Your best bet is to replace the sensor and get the code cleard by whoever scanned it for the 0031 code.
Posted on Jul 23, 2009
try to reset for a momentany failure, disconnect the negative battery terminal few minutes, then reconnect and start engine
Posted on Jul 30, 2009
Tips for a great answer:
Nov 25, 2015 | Toyota Cars & Trucks
Dec 18, 2013 | Lexus GX 470 Cars & Trucks
Jun 17, 2013 | 2006 Toyota RAV4
May 16, 2011 | 2004 Toyota RAV4
Dec 13, 2010 | 2003 Toyota Camry
Mar 24, 2010 | 2002 Toyota 4Runner
Jul 18, 2009 | 2006 Toyota Sequoia
17 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: