Question about Chevrolet Impala

Open Question

Belt diagram for 2007 chevy impala 3.5 - Impala Chevrolet Cars & Trucks

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 335 Answers

SOURCE: I need a diagram for

Hello and welcome. here is a picture of the correct belt routing.


Posted on Oct 06, 2010

Testimonial: "Thank You"

  • 1757 Answers

SOURCE: i need a serpantine belt diagram for 2006 chevy

Click on the following direct Link. It has the Serpentine Belt Diagram that you will need.

Posted on Mar 24, 2010

  • 8582 Answers

SOURCE: belt diagram for 2004 chevy impala ss

please let me know if this is the wrong one


Posted on Sep 23, 2010

  • 17970 Answers

SOURCE: diagram for drive belt replacement 2004 chevy

Check the next diagrams for 2004 Chevrolet Impala 3.8L SFI OHV 6cyl...


Fig. Serpentine drive belt routing-3.8L (VIN 1) Engine (click for zoom)


Fig. Serpentine drive belt routing-3.8L (VIN K) Engine

Removal & Installation - 3.8L Engine

L32 Engine
1. Rotate the drive belt tensioner using a 15-mm box end wrench on the pulley nut.
2. Remove the drive belt.
After the new drive belt is installed, make sure that the mark on the drive belt tensioner is within range, as indicated on the tensioner housing.

3. To install, lift or rotate the drive belt tensioner using a 15-mm box end wrench on the pulley nut.
4. Install the drive belt. Make sure the drive belt is properly routed. Make sure the drive belt tensioner is operating properly.

L67 Engine
The supercharged 3800 engine utilizes two drive belts. The outer drive belt drives the supercharger. The inner drive belt drives the following components:
Power steering pump
Water pump

Air conditioning compressor All driven accessories rigidly mount to the engine. Spring-loaded belt tensioners maintain the drive belt tension. Each drive belt has its own tensioner. A drive belt squeak, occurring when the engine starts or stops, is normal and has no effect on the durability of the drive belt. The drive belt tensioner can control the drive belt tension over a broad range of drive belt lengths, due to stretching. However, there are limits to the tensioner's compensation ability. Poor tension control and/or damage to the tensioner may occur after using the tensioner outside of its operating range. Replace the drive belt when this occurs.

1. Lift or rotate the supercharger drive belt tensioner using a 15 mm box end wrench on the pulley nut.
2. Remove the supercharger drive belt.
3. Lift or rotate the drive belt tensioner using a 15 mm box end wrench on the pulley nut.
4. Remove the drive belt.
5. To install, reverse removal procedure.

Hope helps with this.

Posted on Nov 11, 2010

  • 94 Answers

SOURCE: belt diagram for a 2007

lcorgiat_63.jpgThis should help

Posted on Feb 11, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need a diagram for routing a serpintine belt for a 2007 chevy impala lt with 3.5 L 3500

there is a decal under the hood/engine compartment somewhere that the factory puts on that shows you the belt routing.

Sep 21, 2014 | Cars & Trucks

1 Answer

Belt diragram for 07 chevy impala

Normally there's diagram under hood area, sometimes near radiator shroud, or on belt cover area, or in owner's manual. If not do a google search by engine vin letter # or size for drive belt routing. Autozone has some online diagrams, also.

Jul 11, 2014 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Serpentine belt diagram for chevy impala lt v6 3.5 flex fuel

you need to post as a question, this is not understandable

May 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

Is there a fuse fot the windshield washer pump on a 2007 chevy impala and if so where is it

there is a fuse for the windshield washer pump. It is located in the under the hood fuse box.The fuse is near the bottom marked WSW. Look in the manual for fuse box (under hood) I read that Chevy recommended repacing the 10 amp fuse with a 15amp. There are spare fuses in the bottom of the fuse box(labeled in the manual) and there is a 15 amp. I changed mine in 3 minutes and now it works. Hope I helped.

Dec 22, 2010 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Belt diagram for 2007 Chevy impala

all gm vehicles have the belt diagrams about 6 inches to the left of the hood catch

Oct 02, 2010 | Chevrolet Impala Cars & Trucks

1 Answer

95 chevy impala 5.7l serpentine belt diagram

If you will look under the hood around the radiator or on the underside of the hood it should be on a sticker there for you to look at.  

Dec 23, 2009 | 1995 Chevrolet Impala

2 Answers

Serpentine belt diagram for 2003 chevy impala

send an email to and I will send the diagram to you

Jun 23, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides