Question about Nissan Frontier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you haven't figured it out yet, try the two links below. They have pics and diagrams. I haven't done this yet but, Nissan suggesting to have it done. (Sitting in the dealer having oil changed as we speak. They want $90 to replace the 2 filters.) I'm planning on doing it myself to save about $70. Doesn't look too difficult - just a little time. Parts are about $22 at local parts store. hope this helps. (Won't be back on this forum. So won't see any response you submit back).
Posted on Dec 11, 2008
These are the steps to replace a fuel filter.
Get the new filter from a store. Get rubber gloves and a plastic bag. Get plyers, phillip and regular screw drivers, and hole plugs.
Turn off engine. (Put out all cigarettes/cigars etc)
1) Loosen the gas cap to release pressure.
2) Put on gloves. You will get gas on your hands.
3) Loose the clamp on the top of the filter.
4) Work off hose on top of filter. Use plyers twisting back-and-forth and pulling up or pry up using regular screw driver or pry up using long-nose plyer under the rubber pipe edge. This will be harder than it looks. keep filter upright.
5) Plug the hole in the top of the filter. (It's filled with gas)
6) Loosen clamp on the bottom of the filter.
7) Cover filter with plastic bag.
8) Turn the filter down
9) Work off the hose on the bottom of filter.
To replace the filter reverse the above steps in reverse.
Plug the hole in the bottom of filter and dispose of the filter as per regulation.
Posted on Apr 05, 2009
If you engine is a 2.4 liter it's on the passenger side center of the engine compartment, the hoses from the fuel filter conncts to the throttle assembly . You may have to remove the air filter housing to see it. It is a round canister hoses held on with fuel line clamps. hope this helps
Posted on Apr 06, 2009
From the 2009-2010 Maxima Service Manual that can be obtained here. I think Promanuals.net is the only place that has the 2009-2010 full service manual as of now.
1. Disengage the filter cover tab (1) by pushing up and pull out to
remove the filter cover.
2. Remove the in-cabin microfilter from the blower unit by using the
pull tab on the bottom of the filter.
Posted on Oct 02, 2009
I just did this on our 2007 Sonata. 1. open the glove box. On both sides of the glove box, there is a black tab which prevents the glove box from opening to far. The Chilton manual says to remove these, but that is more difficult then simply pressing inward on the sides of the glove box to release them from the channel. Now the glove box should open even more. Next, remove the piston arm from the right side of the glove box. You can do this by removing the panel on the side of the dash, but you first need to open the passenger door. You can also just use a screwdriver or other tool to slip the piston of without removing the dash side panel. Now with the glove box hanging fully open, you can see the cabin filter box. There are tabs on both sides of the front that you simply press together in order to slide the filter out of the box. This whole process from beginning to end should only take about 10 minutes and is very simple.
Posted on Dec 27, 2009
Tips for a great answer:
Feb 24, 2016 | Nissan Cars & Trucks
Jun 04, 2015 | Nissan Cars & Trucks
Feb 11, 2015 | 2009 Nissan Frontier Crew
Feb 27, 2011 | 2009 Jeep Grand Cherokee
Jan 13, 2011 | 2009 Hyundai Sonata
Mar 10, 2010 | 1993 Nissan 300ZX
Oct 18, 2009 | 2008 Nissan Frontier
Oct 02, 2009 | Nissan Frontier Cars & Trucks
Apr 06, 2009 | 1998 Nissan Frontier
Mar 12, 2009 | 2002 Nissan Frontier Crew Cab
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: