Question about Mazda 323

Open Question

1987 mazda B2200 alternator replacement

Fan belt replacement

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Mike258
  • 1498 Answers

SOURCE: fan belt replacement

Hey there tsukaska,

No problem.

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator.
  • The tensioner pulley is near the Alternator toward the center of the engine. It's on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Any other problems, just click the ASK button.

Remember: Good thing come to those who Rate!!!

Mike

Posted on Aug 05, 2008

Ad
old marine
  • 1983 Answers

SOURCE: replace alternator belt 97 mazda protege

Here's the page from the AutoZone online manual for replacing drive belts.

Posted on Mar 10, 2009

rcampsr
  • 90 Answers

SOURCE: how to put on ignition switch on a '88 mazda b2200

If you mean actually replacing the ignition switch on the vehicle with a locking column. You need to do this. Dicconnect the battery, remove the lower panel of the dash if there is any. There is a bolt on the steering column near the fire wall on most vehicles, remove this bolt, it will release the spline on the steering column. Disconnect all wiring going to the column, unbolt the column from the dash support. Remove the column from the truck, on the ignition switch you will see where the two shear bolts screw the assembly together, center punch the center of each bolt. Now drill the bolt with a 1/8" drill about 1/4" to 3/8" deep. Now use a 3/8" drill and drill out the shear head until it comes off the bolt. You can now remove the switch assembly from the column. The new assembly should come with new shear off bolts so when you bolt it in place when tightned they will break off rendering it tamperproof again. Most vehicles are designed like this now to stop theft. Check the column for operation before reinstalling it in the reverse of above. You just want to make sure the key locks and unlocks the column before reinstalling in the vehicle. You may want to do this before you totally tighten the bolts and break them off permanently. Good luck, RAC

Posted on Apr 14, 2009

  • 1 Answer

SOURCE: 99 Mazda Miata Alternator Belt Replacement

there is one large bolt 13mm i think near the top and the tensioner on the side. just loosen that baby and push the alternator and take off the blet

Posted on Apr 17, 2009

  • 218 Answers

SOURCE: how to replace an alternator belt on a 2003 mazda

Hi there...my name is Keith..and yes..you will have to take the surpentine belt off..and it no fun..but thats just what you will have to do..im sorry..and it will take some fussin and cussin ..or take it to a shop..im sorry i dont have a better outlook..and if you need further assistance..write me back

Posted on Jun 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i put on my timing belt with out removing the fan on my mazda b2200 carb


Should be able to loop the belt around the fan before you install this.

Oct 04, 2012 | Cars & Trucks

1 Answer

I have a 1987 mazda b2000 2.0L M/T i just bought but the vacuum lines were all cut. i need a detailed decription of how to put these back together along with a vacuum hose routing diagram. i have been on...


Hi Brian.

The diagrams on Mazdatrucking.com are for the B2200. I have uploaded the vacuum diagrams for 1987 B2000 here. The files are three diagrams compressed in a zip folder. Please follow the instructions in server page to download the files.

Regards.

Ginko

Dec 15, 2011 | 1988 Mazda B2200

1 Answer

Is there a fuse for 1987 Mazda B2200 fuel pump? If so, where is the fuse located?


The standard fuel pump on that Mazda is a mechanical pump. This is what it looks like unless somebody did a modification on it and fitted an electrical pump.

images?q=tbn:and9gcqg0s9is7sjkp_kpvj5chvolmmsjwv2bja3dwtqnyq4fxvujckq3g

Apr 14, 2011 | 1988 Mazda B2200

1 Answer

1989 mazda b2200. new batt. new cables, new altornater. will not hold a charge. will not charge off alt.


Sorry this isnt a solution but i am having the same problem with my mazda b2200 i replaced the alternator and now the battery will not hold a charge. Please help

Jan 26, 2011 | Mazda B2200 Cars & Trucks

1 Answer

Timing instructions


the timming should be set @ 6BTC you will need a timming light to check it.
You should go buy a manual from your local automotive store befor changing your timming belt
the site below will show you how to make sure you timming marks are right but it will not explain the removel or installation
http://www.mazdatruckin.com/B2200//B2200_Timing_Belt.html

Feb 25, 2009 | 1988 Mazda B2200

2 Answers

How do i change the fan belt


well has soon as you loosen and take out the alt the belt will become loose then put alt on it will slide down to put belt around and then pull up on alt and tighten it up

Jan 25, 2009 | 1988 Mazda B2200

2 Answers

I have 1987 Mazda B2200 2.2 ltre, turns, fires, no fuel psi.


I had something like this before. There is a fuel saftey switch near the gas tank right by the rear end. Its a roll over sensor and mine fell off the mount and I guess the truck thought it was upside down :)

Dec 03, 2008 | 1988 Mazda B2200

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...