Question about 1995 Jeep Grand Cherokee

2 Answers

1995 Jeep Grand Cherokee seat belt noise and light.

When I start my 95 Jeep Grand Cherokee Limited the seat belt light comes on as usual and chimes 6 times. Normally once I put my seat belt on, the light goes out and the chime quits.

Now the chime turns into a constant beeping/buzzing after the 6 chimes are over and the light does not go out, even though the seat belt is used.

I can not find anything wrong with the seat belt itself. I removed the fuses 8 and 19 which made it stop. I replaced these fuses with new ones and the light and chimes come right back on.

Anybody know what is causing this problem?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

Hi
There is a switch in the seat belt latch whe your sitting in the seat this will ba the part o the right side, see if something went into the latch part? or the switch is bad i think you have to replace the belt to fix the switch
RD

Posted on Jan 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thank you so much. I started my Jeep and the noise (that has been driving me crazy for 4 mo. )Reached down the right side of the driver seat and wiggled the sensor wire and it stopped. I will replace the switch. I'm so happy to have found the problem.

Posted on May 29, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i know if my 95 jeep grand cherokee laredo 4.0 inline 6 is an interference engine


You have a timing chain that is good for the life of the engine. The only thing that could need replacing is the chain tensioner if it starts to make noise.

Jan 31, 2014 | 1995 Jeep Grand Cherokee

1 Answer

Is a 1995 jeep grand cherokee limited v8 vs. inline 6 transmission interchangeable?


No sir they will not interchange. i worked at a transmission shop for 7 years. the inline 6 has a 500 trans in it and the v8 has a 518 trans in it. the bellhousings are different.

Jan 03, 2014 | 1995 Jeep Grand Cherokee

1 Answer

I have a 95' Jeep Grand Cherokee Limited with a


Are you check your previoud questions: check_engine_error

Keep us updated.

Jun 07, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Why is the fun belt of my jeep cherokee 1995 limited making so much noise and how can it be stop?


either the belt is too loose, or need to be replaced, make sure its the belt and not a bearing. Thanks.

May 27, 2011 | 1995 Jeep Grand Cherokee

1 Answer

I have a 95 Grand Cherokee Larado.I have a binding noise coming from the front end. Just replaced, bearings and U Joints in front, and seals and bearings in back.


sounds like the drive shafts may not be right back properly or maybe a u joint not seated in straight
jack the truck up and spin whel by hand with 4 wheel locked and look for the binding noise

Apr 14, 2010 | 1995 Jeep Grand Cherokee

1 Answer

AIR BAG LIGHT AND CHIME RINGS PERIODICALLY


I have a 2002 jeep grand cherokee Limited and Had similar problem. Found out that a wire/connection harness had gotten cut under PASSENGER seat.from seats moving back and forth. It's part of the airbag system, it tells airbag system if seatbelt is fastened and if occupant is in seat. Since the wire is broken, it can't report back to air back system and activates the light. try this, hope it helps.

Aug 05, 2009 | 1999 Jeep Grand Cherokee

1 Answer

After i start my 95 jeep grand cherokee limited


crank or camshaft sensor will cause this, a bad crank sensor will cause it not to start or start hard. it controls timing and sends info to pcm for proper fuel mixture and spark at the right time.

Apr 05, 2009 | 1995 Jeep Grand Cherokee

3 Answers

1995 Jeep Grand Cherokee seat belt light does not go out.


Hi,
First of all, I take it you are using your seatbelt.
There is a small micro switch in the bottom of the seatbelt plug.
Check that it`s still in place. It`s only a contact breaker switch.
You could unwire it to stop the annoying light, but will need to fix it for the next MOT

Jan 19, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

693 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...