Question about Toyota Cars & Trucks

Open Question

Lug nut socket size corolla - Toyota Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22219 Answers

SOURCE: WHAT SIZE SOCKET IS NEEDED

32mm

Posted on Nov 24, 2008

Ad
  • 566 Answers

SOURCE: front rotor nut

hi out of curiosity? are wanting to renew thebrake disc/rotor ? or the actual hub that rotor fits to ? as not usually necessary to have to remove hub to change rotor ? unless the rotor is bolted to hub from the rear ?

Posted on Nov 08, 2008

  • 832 Answers

SOURCE: How do I change tire on Audi A6? Tool doesn't

Just get the right tire range to fit the lug nut size. You
must replace your existing tire range. It's the only way.

Posted on Nov 10, 2009

  • 3640 Answers

SOURCE: broken lug nut how to replace lug nut studs

take off tire. remove old stud by hammering it out with a punch. put a socket behind axle plate so as not to break the plate. when replacing, just start stud from back by hand, then use a lug nut to pull it in tight. when tight replace tire!

Posted on Apr 14, 2010

  • 4793 Answers

SOURCE: What wrench is needed to remove the 2002 GTI lug nuts?

they are the locking wheel nuts(lugs)and you will need a key(not a hex allen key)to remove them.if you look close you will see that the sides are not equal.
I use a nut spilitter or an old socket hammered onto the nut to remove it,means replacements but next time you buy a car check to make sure you have the radio code and the wheel nut key.

Posted on May 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know the socket size to fit the lug nuts on a Dixie chopper magnum225023 x 10150-12


We don't know what size. So how about try all socket that you have. Or measure the nut and go buy it.


Good luck

Mai

May 16, 2017 | Cars & Trucks

1 Answer

I have lost wheel socket, so cant remove wheels, special stud in each wheel


If they are Factory Wheels Dealer should get you a key Socket. If they are After Market Wheels then depending on the exterior shape and size of the special Lug nut get a LUG NUT REMOVER SOCKET SET from a Auto part Store. Since you will have to use a Impact wrench best will be to go to a Professional Tire and Rim Installer and they usually have all kinds of Lug nut remover sockets.
Send me a clear picture and diameter of the lug nut to suggest further solutions.

Mar 15, 2015 | Cars & Trucks

1 Answer

How much torque for 2011 ford f150 lug nut


Lug nuts can usually be tightened by what size socket they take.I make it 100 ft/lbs on a 3/4"(19mm),and 110 ft/lbs for a 13/16"(21mm).This should be close enough.(I have actually gone to assist people with changing a flat and found the lug nuts loose enough to remove with no tools!) So better a little on the tighter side.

Sep 24, 2014 | Ford F-150 Cars & Trucks

1 Answer

What wrench is needed to remove the 2002 GTI lug nuts?


they are the locking wheel nuts(lugs)and you will need a key(not a hex allen key)to remove them.if you look close you will see that the sides are not equal.
I use a nut spilitter or an old socket hammered onto the nut to remove it,means replacements but next time you buy a car check to make sure you have the radio code and the wheel nut key.

May 29, 2010 | 2002 Volkswagen GTI

1 Answer

Stud is stripped out in the rear wheel of my 93 honda accord Cannot remove wheel


do you mean the lug nut or the lug? if it is a lug nut then take a metal file and file down the flats to a smaller socket size so you can get a firm grip on it with the smaller socket

Oct 15, 2009 | 1993 Honda Accord

1 Answer

Wheel nuts on back wheel of 06 ford focus stripped.


Hi Ray,

I put in some time at an auto salvage yard. Aluminum wheels were big sellers and not something we wanted to damage.

When the lug nuts needed some persuading, we got out the high impact 12 pt deep sockets.

First try we used the correct size.

If they were stripped, one size smaller. We hammer them on to the lug and use a breaker bar with a pipe extension.

The only real problems we had were getting the lug nuts out of the sockets.

Good luck and best regards,
Mike

Aug 17, 2009 | 2006 Ford Focus

1 Answer

I don't have a anti-theft lug wrench for my znx rims


Your going to have to buy four 9 point socket and a 5 pound sledge hammer, a breaker bar, a pipe, and 4 new lug nuts. If you lost the key to your anti theft lug nut you can take it to a professional  tire repair shop and they can remove the lug nut's for you and hope they have a key that will work. If not there have a tool that can take the lug nut off, with a cost. If your going to try it your self, place the 9 point socket slightly smaller on the lug nut and hammer it on. Be careful not to hurt your self or the car. Once the socket is seized on the lug nut, use the breaker bar and the pipe as an extension for leverage to take the lug nut off. Once off discard the lug nut and socket and do the other three the same way. Good luck and hope this helps. 

Jul 01, 2009 | 2003 Porsche 911 Carrera

1 Answer

I have a stripped lug nut and a stripped locking lug nut and i cant break neither one losse what should i do


If you have a socket you are willing to destroy, Find a socket that is as close to the size of the lug nut, but not bigger. Whack it on with a hammer, use a socket wrench (with enough leverage) to remove the lug. Locking nut: Find a socket that is about the same size as the lock nut, follow steps above. **This only works with the star shaped lock nuts and the ones that "key" goes into.

Mar 08, 2009 | 1993 Isuzu Amigo

1 Answer

I own a 2002 jaguar x-type and i need to know the lug nut or wheel nut size


I believe the size is the measurement from any of the flat sides of the lug nut across to a flat side directly across from it. So to make it easy to measure, just remove one, and I assume it would be measured as metric. An easier way would be what size metric socket fits the lug nuts? That would be the nut size.

Dec 16, 2008 | 2005 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...