Question about Toyota Sienna
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuel pump for 2000 toyota celica
Yes, remove the rear seat cusion and then lift up the padding. Take the screws out of the cover and them you can access the top of the fuel tank and remove the pump and fuel level sending unit.
Posted on Mar 02, 2009
Posted on Jul 26, 2009
Most likely the problem is the lower steering knuckle. This is the one outside of the firewall, under the vehicle and it hooks up to the power steering assist cylinder. In my opinion the knuckle has to work at an unreasonably steep angle and this compounds the problem. The knuckle (especially in salt areas starts to corrode and becomes hard to turn. Toyota says the water gets into the bearing and they beings to rust the bearing and turning the whell starts to feel stiff. I have this problem and I sprayed liberal amounts of a rust inhibitor that a local place uses to rust proof cars (They sell small spray bottles of it for $5). They are called OIL TECH in Barrie, Ontario and make up their own formula. The formula has addatives that breaks the surface tension on the oil treatment and gets it into the tiny cracks and crevices on your vehicle. I sprayed this all over the knuckle, turned it back and forth a couple of times and continued spraying. I let it sit for an hour and went for a test drive -- problem solved. You could actually see the rust on the exposed parts of the knuckle. I probably will have to do this once every month of two but what the heck. It is a lot cheaper than having to replace the steering shaft ($1000+???) Probably other types of rust proofing or lubricating oils will work. I long for the old days of grease fittings and you never had to replace ball joints and tie rod ends etc.
Posted on Aug 10, 2009
On my 2004 toyota,,,directly behind the passenger side front seat (have to push passenger seat all the way forward to see it, there is a small square flap in the carpet,,,lift that up and underneath is a big bolt which you turn counterclock wise with your spare tire lug wrench and the tire will lower to the ground. thats about it. good luck
Posted on Oct 12, 2009
Tips for a great answer:
Apr 24, 2016 | 2005 Toyota Sienna LE
Dec 12, 2015 | Toyota Cars & Trucks
Nov 29, 2015 | 2005 Toyota Sienna LE
Aug 06, 2015 | 2009 Toyota Sienna LE
Sep 30, 2013 | 2005 Toyota Sienna LE
Nov 28, 2012 | 2005 Toyota Sienna LE
Aug 01, 2009 | Toyota Sienna Cars & Trucks
Jun 30, 2009 | 2004 Toyota Sienna
Jan 13, 2009 | 2004 Toyota Sienna
1,080 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: