Question about 2001 Pontiac Montana

1 Answer

2001 pontiac montana

How to remove heater fan and how hard is it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 436 Answers

Why do you need to change it?? it isn't hard 3 bolts just hold it in'

Posted on Sep 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace rear springs on a 2001 Pontiac Montana?


images for 2001 Pontiac Montana rear springs ..

Replace broken rear coil spring on pontiac montana - Fixya

www.fixya.com/cars/t3213136-replace_broken_rear_coil_spring_pontiac
Oct 17, 2009 - replace broken rear coil spring on pontiac montana - Pontiac 2000 ...Im having problems with my rear lighs on my 2001 pontiac montana, the ...

Sep 22, 2015 | 2001 Pontiac Montana

1 Answer

Pontiac montana 2000 general fan (all air-hot and cold) doesnt function changed the fuse and now only works from settings 3-5 and change the heater relay is my fuse labelled 'air" not the right...


there is a blower motor resister which controls fan speed i believe its located pass side of dash by blower motor has one plug about 5 wires red ,orange .blue yellow

Feb 09, 2011 | 2001 Pontiac Montana

1 Answer

Were is the heater sensor upstream located on 2001 montana van


The heater sensor I think you are talking about it is the upstream oxygen sensor. Sometimes the code reader just says heater sensor upstream and doesn't tell you its actually the heated oxygen sensor.

Jan 04, 2011 | 2001 Pontiac Montana

1 Answer

Pontiac montana heater


CHECK THE HIGHT OF THE HEATER MATRIX IN THE CAB , IF ITS HIGHER THAN THE FILLER/EXPANSION TANK. THEN ITS AN AIR LOCK, LOOK FOR THE HIGHEST PIPE AND SEE IF THERE IS A BLEED VALVE, IF NOT TAKE BOTH PIPES OFF THE MATRIX FEEDS AND FLUSH OUT TO SEE IF IT IS BLOCKED, AND RECONNECT LOWEST PIPE FIRST AND FILL SYSTYM TILL WATER APPEAR FROM TOP AND RECONNECT RUN MOTOR, AND KEEP TOPIN UP

Dec 05, 2009 | 2001 Pontiac Montana

1 Answer

Heateer core leak


yes you can take the 2 hoses going to the heater core and join the 2 together under the hood so that coolant flows thru the hoses but not thru the heater core

Apr 16, 2009 | 2001 Pontiac Montana

2 Answers

Location of rear heater blower on 2000 pont montana


i got the same van ill take 600 -500$ sk8er724@yahoo.com

Jan 07, 2009 | 2001 Pontiac Montana

3 Answers

Pontiac montana heater works but doesnt blow heat out on defrost


If the heater core is good and the blower works, the valve doors may not be opening and closing properly to direct air towards the proper vents. This may be because something has fallen in and is obstructing their movement. The actuating motors may not work properly, or the linkages that connect them to the mode doors may be worn or improperly adjusted. You can get a look at the mechanisms by removing the driver side knee bolster (two screws) and a lower trim panel on the side of the center console.

Be careful fiddling with the linkages. Everything is plastic and easy to break, and replacing the heater box requires removing most of the dash.

Dec 20, 2008 | 2001 Pontiac Montana

1 Answer

Air Filter


remove the tube that connects the intake to the air flow sensor first

Oct 15, 2008 | 2001 Pontiac Montana

Not finding what you are looking for?
2001 Pontiac Montana Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...