Question about Cars & Trucks

Open Question

Puma wing mirror repair - Cars & Trucks

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
juggernautxt
  • 145 Answers

SOURCE: Passenger wing mirror fixing

this is an easy fix you must remove the door panel there are several screws, then remove the upper secondary panel unbolt the old mirror bracket using a 10 mm socket and place the new one in place and re tighten replace panels and you are done..

Posted on May 02, 2009

Ad
tntjasmine
  • 24 Answers

SOURCE: I need t take off a drivers side wing mirror

you may be able to remove the mirror inner trim panel (small triangular shaped trim piece above door trim panel)
to access the mirror mount.
If not then you will have to remove the trim panel for access to the back side of the mirror

Posted on Aug 26, 2009

  • 94 Answers

SOURCE: wing mirrors damaged

1) Disconnect and isolate the battery negative cable.
(2) Remove the trim panel from the front door.
(3) Disconnect the power mirror wire harness connector from the door wire harness connector.
(4) Remove the mirror flag seal from the inner door panel.
(5) Remove the three nuts that secure the power mirror mounting studs to the door flag.
(6) Remove the power mirror from the outside of the door.

Posted on Jan 05, 2010

  • 1 Answer

SOURCE: Electric wing mirror on Hyundai Getz 2006 model.

does anyone know how to get dash out so i can replace a bulb in dashboard of getz 2006 model

Posted on Mar 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford puma 1.4 . just had a small front offside bump (damaged wing and broke the headlight ) car now running lumpy.


I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure.
Best Manuals

Aug 05, 2016 | 1997 Ford Puma

1 Answer

How to fix electric wing mirror Honda crv


How To Install Replace Side View Mirror Honda CR-V 02-06 ...

? 10:31
https://www.youtube.com/watch?v=tuGFzxCVh7k
May 8, 2012 - Uploaded by 1A Auto Parts
In this video, 1A Auto shows you how to repair, install, fix, change or replace a broken, smashed, cracked, or ...

Replace 2002-2006 Honda CR-V Side Mirror, How to ...

? 14:20
https://www.youtube.com/watch?v=UKLPkZszbrA
Sep 25, 2013 - Uploaded by Go-Parts
Side Mirror purchased from www.Go-Parts.com Links to purchase products: ...

2000 Honda CR-V side mirror replacement - YouTube





Dec 16, 2015 | Honda HRV Cars & Trucks

1 Answer

How to replace wing mirror


Replacing Wing Mirrors - YouTube

? 4:06
https://www.youtube.com/watch?v=2LAqSfV-swI
May 23, 2010 - Uploaded by Decibel Car
Want to replace your wing mirrors with aftermarket ones ? Had someone in a shopping mall car park break ...
    Remove the screws that hold the mirror and remove it from the door. Attach the new mirror. Reconnect the electrical connector and make sure you test the new mirror before putting the parts back into place. Reverse the entire procedure to reassemble the door trim panel.

    Replace a Broken Side View Mirror ' The Family Handyman

    www.familyhandyman.com/automotive/replace-a-broken...mirror/view-all

Dec 02, 2015 | Cars & Trucks

1 Answer

Wing_Mirror_Problems


Shaun,
I've never had to disassemble a Jeep power mirror. One of two possible problems here. Depends on how Jeep conveys the power to the "wing". If they use brushes and contacts, it may just be that the brushes got dirty when you folded it in [onto a corroded contact area] If this is the case, spray some penetrating oil into the gap between the wing and the base. Then fold and unfold the wing several times to clean the contact. Make sure that you have the wing pulled all the way out. There should be a detent that you can feel.
If they use a wiring harness going up all the way inside the wing, one of the wires has broken. you would need to remove the mirror, disassemble it and repair the damaged wiring.
Charlie

Nov 08, 2011 | 2000 Jeep Cherokee

1 Answer

Loose wing mirrow


Check this guide as reference for solve ypur problem; this is one DIY about replace Wing Mirror...
1.- Disconnect your negative battery cable, if your Ford Focus has power side mirrors. If it has manual side mirrors, disconnecting the battery is unnecessary.
2.- Pry off the wing mirror's inside sail panel (shaped like a triangle). Insert a trim panel tool between the door skin and the plastic panel to pry it off.
3.- Carefully pull the sail panel away, minding the wiring if the mirror is power-operated. Unplug the electrical harness and set the panel aside.
4.- Open the door and hold the outside part of the wing mirror steady. Remove the mounting bolt with a socket wrench, and then remove the mirror screw with a Phillips screwdriver (the mirror bolt and screw is visible with the panel removed).
5.- Pull the wing mirror assembly from its mount (from the outside). Insert the replacement mirror assembly in place; tighten the bolt and the screw.
6.- Attach the wiring connection to the replacement mirror. Position the sail panel in place and push it against the door to snap it back on.

Hope helps (remember comment and rated this). TY for using Fixya.

Jun 26, 2010 | 2000 Ford Focus

1 Answer

Wing mirrors damaged


1) Disconnect and isolate the battery negative cable.
(2) Remove the trim panel from the front door.
(3) Disconnect the power mirror wire harness connector from the door wire harness connector.
(4) Remove the mirror flag seal from the inner door panel.
(5) Remove the three nuts that secure the power mirror mounting studs to the door flag.
(6) Remove the power mirror from the outside of the door.

Jan 04, 2010 | 2000 Jeep Grand Cherokee

2 Answers

Mt drivers side wing mirror glass has popped out,


If the glass broke when it fell out any windshield repair shop can make and install a new mirror. If it didn't break go to the hardware store and get a squeeze tube of bathtub silicone sealer and a roll of black electrical tape if you don't have any. Run a bead of silicone around the edge of the mirror back and a few dots in the center. Stay in about a 1/2 inch so it wont bleed out when you press it on. Using a couple of blocks of wood or plastic or anything non-metallic on the mirror face, make 2 or 3 wraps around the mirror and mirror bracket with the black tape. Stretch the tape as you wrap to put some tension on it but not real tight, just snug. Do this on both ends of the mirror and leave it for a day to let the silicon set up and cure. Then remove the tape and shims and you shouldn't have any more problems with that mirror. Hope this helps.

Dec 13, 2009 | 2005 Mercedes-Benz C-Class

1 Answer

I need t take off a drivers side wing mirror


you may be able to remove the mirror inner trim panel (small triangular shaped trim piece above door trim panel)
to access the mirror mount.
If not then you will have to remove the trim panel for access to the back side of the mirror

Aug 26, 2009 | 2003 Toyota RAV4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...