Question about Isuzu Rodeo
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there will be 4 bolt and a couple of screws behind the bumper and you will have to do this from under neath the car
Posted on Sep 14, 2008
SOURCE: removal of front bumper
The bumper is secured using four 13mm nuts.
a) Open the bonnet and look for one 13mm nut on the lower inside of each headlight.
b) Remove the towing eye covers on the lower section of the bumper and you will find one 13mm nut in each.
Hope this helps.
Posted on Apr 09, 2010
If you open the hood and look behind the bumper you will see two bolts on each side(verticaly) almost under the headlight. The have a 18mm head on them. You must remove all four. then under the truck on both side there is two more on each side 18mm as well. They bolt for the bumper into the frame. If you get in front of the tire and look behind the bumper you should see the bolts going into the frame horizontally once you remove them there might be a few staples on the bottom to pull out and disconnect the fog light if it has them. Then the bumper should come right off. Good luck 4 thumb up is appreciated if this helps you
Posted on Dec 01, 2010
Testimonial: "Thanks so much ,very helpful!"
Tips for a great answer:
If the headlight is damaged, cut off these retainers
Install new headlight retainers
Apr 19, 2011 | 2002 Toyota MR2 Spyder
Feb 26, 2011 | Isuzu Rodeo Cars & Trucks
Dec 01, 2010 | 2002 Dodge Durango
May 27, 2010 | 2002 Chevrolet Avalanche
Dec 22, 2009 | 2002 Volkswagen Passat
Dec 17, 2009 | 2004 Toyota ECHO
Aug 27, 2009 | 2002 Isuzu Rodeo
405 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: