Question about 1994 Ford Thunderbird

1 Answer

Does anyone have a diagram of the '94 ford t-bird trunk lock assembly?

I locked my car keys in my trunk accidently.Afriend tore up the trunk lock to get the trunk open. I bought a new trunk lock but I can't get it installed properly because there's a part missing. I need a diagram so that I can find out exactly what is missing so that I can fix it.

Posted by on

  • CATHY KELLEY Jan 05, 2013

    Thank you for your replies,but I think I'm being misunderstood. I CAN get into the trunk already. My door locks are fine. My problem is that I purchased a new trunk lock to replace the one that was broken by my friend to access my keys. I even had the ltrunk lock ordered special for the car, but I can't figure out how to install the new lock because it came without any instructions,or a diagram of any kind. When I tried to install the new lock,there seems to be some part that it should attach to in order for the lock to operate properly. That's why I'm seeking a diagram of the trunk lock assembly. I tried the website you suggested(@ jimbewtsie2) but could not find what I'm looking for there,either. Thank you for the suggestion though. I need any help with this that I can get...

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

Google it . ask for a diagram for the year and model of your car , not to hard

Posted on Jan 28, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 104 Answers

SOURCE: removal and replacement of key tumbler 1994 Ford explorer

look at the steering column below the ign lock and tumbler there should be a small hole turn key to on pos and push a small rod up the holethis then should release the lock and tumbler,no hole then wheel and coumn has to be stripped to get to lock retainer

Posted on Oct 05, 2009

  • 5 Answers

SOURCE: trunk does not open using dash button or button on

Check your fuse box, look on the diagram and locate the fuse (10 amp most likely) for the auto trunk. The clicking is the relay, it also operates the keylees entry for the doors.

Good luck

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I do have a volvo S70 yeat 98. The trunk dont close it seems to got locked up; i tryed to fix it anf the only lock I found its for the seats. Csn sny onr hrlp me how to fix it mysrlf?


This is a diagram of the lock assembly in the trunk lid. The highlighted area shows the lock in the open position. If you look at your lock assembly and it doesn't look like this, it may be in the locked position causing the trunk to not close. use the trunk key and turn the lock cylinder. You may have to use a screwdriver to gently pull on the lock hasp while using the key to unlock. If the hasp is in the locked position, it should open and allow the trunk to close properly




26206378-tsimyvyhfj5c4zn21qshffsm-2-0.gif

May 27, 2016 | Volvo Cars & Trucks

1 Answer

Diagram of a door lock assembly 93 ford explorer?


Google, diagram of door lock assembly for 93" Ford Explorer.

Sep 07, 2015 | Ford Explorer Cars & Trucks

1 Answer

How do you open the trunk on 2003 t.bird battery is dead


according to ford

http://www.motorcraftservice.com/pubs/content/~WO3TBR/~MUS~LEN/41/03tbrog2e.pdf

you can use your master key on the lock behind the drivers seat

Sep 03, 2010 | 2003 Ford Thunderbird

1 Answer

The doors have been locked on the 55 T bird & cannot be opened no


Use a SLIM JIM or remove the trim panels to gain access to the release rods to the handloes

May 29, 2010 | 1983 Ford Thunderbird

1 Answer

I have a new shape ford focus (05)i cannot open the tailgate without useing the key fob ???????


does the hatch open with the trunk release in the car as it should since it sends an electronic signal just like the key fob. The cylinder for the trunk lock is most likely seized and if you want to replace.. you'll need to remove your trim for the trunk to access the locking assembly

Aug 16, 2009 | 2005 Ford Focus

2 Answers

My Bf has a 1999 saturn SL1 and he lost the key to it... he took to to the car dealiship showed them his papers and they gave him a new key... but the new key does not work. it works on the door and the...


Below are instructions for changing the lock cylinder as well as a few diagrams. Best of luck.
Greg
  1. Disconnect the negative battery cable.
  2. Remove the lock cylinder bezel from the steering column shroud by carefully prying with a thin bladed screwdriver.
  3. Remove the shroud fasteners and remove the steering column upper and lower shroud panels.
  4. Insert the key into the ignition lock cylinder and rotate to the RUN position. Then rotate the ignition cylinder back to the ACC position.
  5. Depress the locking button on the side of ignition module assembly with a thin pick-type tool. Slide the lock cylinder assembly from the ignition module.





3321ca5.gif5b3b81a.gif INSTALLATION:
  1. Insert the key into the ignition lock cylinder and install into the ignition module.
  2. Install the steering column upper and lower shroud panels and the shroud fasteners.
  3. Install the lock cylinder bezel.

Reconnect the negative battery cable.

Jul 30, 2009 | 1999 Saturn SL

1 Answer

1998 Chevy Cavalier trunk lock mechanism


i used a screw where the other one broke off to hold it in place, it needs to be a short one like a tek screw if you know what that is just drill it out first so the screw does'nt snap the plastic

Jul 01, 2009 | 1998 Chevrolet Cavalier

1 Answer

Have 1996 xj6 valet was pushed master key dont work in trunk how do i open trunk?


Had similar problem when keys accidently locked in trunk.Solved by drilling 1 inch circular cutout (series of small drill holes) behind number plate above lock. Lock operating bar then visible. Lock released using long nosed plyers. Note.. release button on lid failed to operate as by coincidence wiring loom failed where it passes trunk hinge ! Hole re-sealed and number plate replaced. I had vallet key but this dosnt open trunk. Hope this helps Pete

Jun 17, 2009 | 1995 Jaguar XJ6

1 Answer

Diagram for volvo trunk lock


My son was missing with the valet parking key while I was driving. When we got home and tried to open the trunk it wouldn't. It also made this buzzing sound when I push on the trunk latch.

Mar 05, 2009 | 2001 Volvo S40

Not finding what you are looking for?
1994 Ford Thunderbird Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

fordexpert

Level 3 Expert

5608 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...