Question about 2010 Ford Edge
Need instructions on ho to replace antenna base on ford edge 2010
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Should be a dome light in the interior that lines up with antennae on roof if it's same as I remember. Remove interior light and there should be screws in there holding base of antennae to roof. If it's just a broke off mast, try to unscrew stud from base & replace.
Posted on Jan 10, 2009
if you dont have a ball joint press and dont know how to use one then dont do it, but if you do its not that bad of a job just jack the truck up under the control arm remove the brake rotor then take the lower ball joint nut off then use a pickle fork to break the ball joint loose then take the axle nut off push the axle out of the bearing and use the ball joint press to remove and replace the ball joint
Posted on Jul 19, 2009
open the lift gate, remove the 2 or 3 8mm hex screws on by the light housing, and then pull outward on the lens. Then grab the bulb socket and twist counter clockwise, turn about 90 degrees and pull out., pull the bulb out and then reverse to re-assemble. don't be afraid to use some force to get the lens out if you need to, but it shouldn't feel like the lens is going to break.
Posted on Oct 07, 2009
Tips for a great answer:
Dec 09, 2015 | 2010 Ford Edge SEL
Jun 14, 2015 | 2007 Ford Edge SE
Dec 03, 2014 | 2010 Ford Edge
Sep 19, 2014 | 2010 Ford Edge
Aug 28, 2014 | 2010 Ford Edge Limited
Jul 11, 2014 | 2010 Ford Edge
Apr 20, 2013 | 2007 Ford Edge SEL Plus
Apr 02, 2012 | 2010 Ford Edge
May 23, 2011 | 2010 Ford Edge
971 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: