Question about 1995 Jeep Grand Cherokee

3 Answers

1995 Jeep Grand Cherokee seat belt light does not go out.

My 1995 Jeep Grand Cherokee 5.2 limited seat belt light does not go out when the ignition is started. There is also a continuous tone. When the ignition is turned off, the tone remains.

Posted by on

  • 2 more comments 
  • coxch Jan 19, 2009

    That did not correct the problem. The light stays on and the buzzer does not stop. It is a constant chime after the initial 6 intermittent chimes.

    I removed fuses 8 and 19 which made the light go out and the chime constant chime go out, but as soon as I put the fuses back in, the chime starts back up again.




  • David Grassel
    David Grassel Apr 12, 2009

    exactly the same problem

  • David Grassel
    David Grassel Apr 28, 2009

    I have the same problem if i remove i belive fuse number 8 and turn the dome lights on while driving it stops the buzzing sound but loose radio etc so not really a fix but a work around occasionally if i turn the jeep off and on 3-4 times with seat belt on the light will stay on but the buzzer goes off

  • Anonymous Mar 31, 2014

    seat belt light,emergency brake light, engine light remain on without a key. engine insert key nothing happens

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The above info is a poor fix - the problem is in the little plastic box that was mentioned - mine isn't pink, it's a dark red color. The box has a little circular cutout for the tone noise to come out of. Pull the box out of its socket - there's a tab on the passenger side of the box.
You cannot permantently remove the box because besides the seat belt alarm it also controls the power door locks and a few other related items.
When you remove the box, you'll see it has two tiny plastic tabs on the top - push those both in and the back of this box will open.
The box contains 3 items - 1) a circuit board with the 8 tabs attached that plug into the socket you just removed the box from, 2) a thing that seems to be a tuning fork, and 3) a small thin round metal disk that the tuning fork vibrates against to produce the seat belt alarm sound that won't go away. It goes away when you remove the disc. Ahhhhhhhhh...peace and quiet! I still use the seat belt - just don't need the malfunctioning alarm distracting my driving.

Posted on Jun 29, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 75 Answers

Theres a small pink box by the hood release looks somewhat like alil speaker this is the devil that torrments you while you drive it just pulls out its got like 8 pins on the back of it maybe be glued in just pull it out thats what i have done no buzzer no light so far no other unwanted side affects

Posted on May 19, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Hi,
First of all, I take it you are using your seatbelt.
There is a small micro switch in the bottom of the seatbelt plug.
Check that it`s still in place. It`s only a contact breaker switch.
You could unwire it to stop the annoying light, but will need to fix it for the next MOT

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is a 1995 jeep grand cherokee limited v8 vs. inline 6 transmission interchangeable?


No sir they will not interchange. i worked at a transmission shop for 7 years. the inline 6 has a 500 trans in it and the v8 has a 518 trans in it. the bellhousings are different.

Jan 03, 2014 | 1995 Jeep Grand Cherokee

1 Answer

My 2003 Jeep Grand Cherokee Limited seatbelt light is staying on even when hooked together


you may have a sweet or something in the seat belt lock making the switch move out of the way, build up on it makes it move out of the way. may be able to clean out with a cocktail stick or somthing like it

Oct 26, 2013 | 2003 Jeep Grand Cherokee

1 Answer

Why is the fun belt of my jeep cherokee 1995 limited making so much noise and how can it be stop?


either the belt is too loose, or need to be replaced, make sure its the belt and not a bearing. Thanks.

May 27, 2011 | 1995 Jeep Grand Cherokee

1 Answer

I need to know the firing order of my 1995 limited jeep grand cherokeemy spark plug wires are missing i have new wires i just don't know the firing order


For the 1995 Jeep Grand Cherokee:
I do not know if you have the 4.0L In-Line (Straight) 6-Cylinder or the 5.2L V8; however I have included bothe below.

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
|..6..|
|..5..|
|..4..|
|..3..|
|..2..|
|..1..|
(front)
Distributor:
...(back)
....5...3.(+)-screw
1...........6
(+)4...2
...(front)

For the 5.2L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back)......
|..8..|........|..7..|
|..6..|........|..5..|
|..4..|........|..3..|
|..2..|........|..1..|
.......(front)
Distributor:
.......(back)
.........3
...4.........6
8...............5
...1.........7
.........2
.......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 21, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Check engine on jeep grand cherokke 1995


Try again and verify, for example.
3 flashes,pause,then 3 more, is 33. etc.
5 flashes, pause 5 more, is code 55.(end of message)
always 2 digit number, then slightly longer pause in between those 2 digits.

Feb 23, 2010 | 1995 Jeep Grand Cherokee

1 Answer

I have a 2005 Jeep Grand Cherokee Limited. My drivers side front power seat does Not stay adjusted. Every time I turn the ignition on the seat moves backward and the back lays down.


The limited edition brings memory setting for mirrors and seats, it recognizes which key are you putting in the ignition and puts the saved setting accordingly to that driver's key. That is the reason your seat keeps moving. You need to reprogram the seat position for that key. Good luck

Dec 30, 2009 | 2005 Jeep Grand Cherokee

2 Answers

1995 Jeep Grand Cherokee seat belt noise and light.


Hi
There is a switch in the seat belt latch whe your sitting in the seat this will ba the part o the right side, see if something went into the latch part? or the switch is bad i think you have to replace the belt to fix the switch
RD

Jan 19, 2009 | 1995 Jeep Grand Cherokee

1 Answer

2004 jeep grand cherokee


Are you using the seatbelts?
The airbag light is on because there is a problem with the system.
PLEASE do not try to fix the airbag problem yourself.
You could accidently activate the bag and get hurt.

Oct 31, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...