Question about 2006 Dodge Ram 2500
Starts,runs fine,leaks from behind fuel filter.Shop says not banjo but ,but looks like quick disconnect hose. Thought maybe 'O' RING WAS CRIMPED.No one has worked on it before,other than all my work on the truck is done at the Dealers. Started after the bed had 1yd dirt in ,going to fast over a large Speed bump. Can I do this work myself?
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 Dodge Ram 2500 Diesel
do you still have the old style lift pump. located on the fuel filter housing or has it already been updated to in tank style. sounds like that to me. i've done a ton of them. chrysler has a whole conversion kit for this mod
Posted on Jan 09, 2009
fuel filter housing on driver side of motor. need the correct size of socket to remove the lid. unscrew lid and pull straight up to remove filter. remove old filter from lid and install new filter and seal. drain old fuel/water from housing. then reinstall filter into housing. tigthten lid then make sure the petcock is closed from draining it earlier. bump the starter a couple times to fill the filter housing then start engine. clean any spilled fuel and your done
Posted on Jan 22, 2009
You need to rent the ball-joint removal/installation tool, a ball-joint removal fork, and a foot pound torque wrench (at either Autozone or Pepboys) and you need to borrow or buy a rack 3/8",1/2" metric sockets, I think a set of E-torks, a good size hammer, a repair manual (for directions and torque specifications), and a good jack and stands.
Posted on May 02, 2009
What you are seeing is the water pump (often mistaken as an idler pulley). It is a very simple change. Remove the belt, loosen the two bolts on the water pump ("diamond shape with pulley on front"), pull the water pump out, and reverse steps. You may want to drain your coolant into a very clean or new bucket first or you will loose good coolant when you pull out the pump. Once water pump is in place, replace belt and your good to go. Tools needed : Belt removal tool or 3/8 inch drive/ratchet with extra long hangle or cheater bar, and i believe a 10 or 13 mm socket for the pump. NAPA carrys a lifetime warranty pump...i suggest it.
Posted on May 08, 2009
Tips for a great answer:
Sep 24, 2013 | 2006 Dodge Ram 2500
Acura Coupes and Sedans 1986-1993 Repair Guide
The recommended change interval for the fuel filter on all models is 60,000 miles under normal service. Severe service will require more frequent changing of the fuel filter.
The filter is located in the passengers side of the engine compartment.
CAUTION Before disconnecting any fuel lines, be sure to open the gas tank filler cap to relieve any pressure in the system and wrap a shop towel around the fuel line fitting before opening. Observe all fuel handling precautions.
REMOVAL & INSTALLATION
See Figures 1, 2 and 3
Fig. Fig. 3: Fuel filter replacement-Legend and Vigor
Jul 08, 2012 | 1991 Acura Legend
Jan 08, 2010 | 2004 Audi A4
Dec 26, 2009 | 2001 Dodge Ram 3500 Truck
Jun 01, 2009 | 1986 Dodge Ram 50
May 31, 2009 | 1999 Dodge Ram 2500 4WD
May 18, 2009 | 1989 Ford F 250
Feb 16, 2009 | 1996 Dodge Ram
Sep 17, 2015 | 2006 Dodge Ram 2500
90 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: