Question about 2008 Peugeot 207 SW

Open Question

Peugeot Reset key fob - 2008 Peugeot 207 SW

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 205 Answers

SOURCE: fob wont work the locks

I have done this procedure for my peugeot 307, but you can give it a try for your Pug expert and let me know if it works.
Disconnect the battery for 5 minutes then after connecting the battery perform the following steps
1. Turn the Ignition switch to the ON position using your key.
2. Press the LOCK button for 10 seconds. It will set your ECU in programming mode.
3. Remove the key and wait for 10 seconds.
4. Press the buttons on the key repetedly for operation (lock und unlock doors) to synchronise the key signals.
5. Again turn the ignition on and start the engine.
6. Turn the ignition OFF

If fails in step 4, then disconnect the battery and reconnect it and wait about 10 minutes to check the remote. Some new ecu units synchronises itselfs if you disconnect the battery while in programiing mode.

Posted on Jun 13, 2009

Ad
  • 1 Answer

SOURCE: key fob wont work on my Peugeot Expert

Try this, press and hold the large button on your key fob,after 20 seconds press the small button while still pressing the large one, the led light will go out and will reset your remote. It worked for me. ray1297

Posted on Oct 23, 2009

  • 1 Answer

SOURCE: i need to reset my peugeot 406 key fob

Had same trouble with my 406, fixing no problem, with new battery in fob, insert into ignition, turn key, BUT DO NOT START ENGINE, hold button for about 10 seconds release button and remove key from ignition, then try and see if doors lock on remote, if not try again, had to do this a couple of times, and it worked, sorry to say that now my key fob button has completely fell apart, through ware and tare

Posted on Feb 10, 2010

  • 98 Answers

SOURCE: key fob on my 54 plate peugeot expert van will not

most cars need a reset when being worked on even as simple as changeing the battery find fuse box look for fuse Labled (hazard or HZD) remove for 15.sec. then put back in it should reset the ECU

Posted on Apr 04, 2010

alicantecoli
  • 22246 Answers

SOURCE: my peugeot 406 key is

you dont just take teh little black chip out of old key and put it in new key or tape it to teh transponder behind the shroud on the column

Posted on Sep 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 3 door peugeot 206 will lock ok with the key fob but will not unlock with the key fob, help!


Sounds like the unlock button on your key fob is the problem, try your spare key fob, if you don't have a spare fob, it's time to get a new one.

Dec 06, 2015 | 2004 Peugeot 206

1 Answer

How to program key on peugeot 307 hdi 2001


put key in icnition turn on but don"t start engine,press door lock and hold for a few seconds,then turn off,key fob should now work,if not try again,also make sure you have the correct battery in key fob.

Nov 29, 2014 | 2005 Peugeot 307 HDi

2 Answers

What does this display message mean "plip battery spent"?in a peugeot 307 brand, it shows when one is about to turn on the ignition key.


what does the word plip battery spent mean on a peugeot 307. It says that when i first turn on the ignition.

Sep 27, 2010 | 2005 Peugeot 405

1 Answer

Key fob for my peugeot 206


Yes you can have multiple key fobs for one vehicle. They will need to be programmed. Some cars require that you program all key fobs at the same time and can only be done through a dealer scanner and some will have instructions in the owner's handbook.

May 16, 2010 | 1999 Oldsmobile Intrigue

1 Answer

Key fob on my 54 plate peugeot expert van will not work after replacing the battery,no visible led on fob


most cars need a reset when being worked on even as simple as changeing the battery find fuse box look for fuse Labled (hazard or HZD) remove for 15.sec. then put back in it should reset the ECU

Apr 04, 2010 | 2005 Peugeot 405

1 Answer

A colleague checked all my fuses on my peugeot 206 - 02 reg. This involved taking them all out one by one and checking them - This was due to a headlight problem - The headlights have now been replaced and...


you can reset it your self bu putting the key in the ignition switching the ignition on and pressing and holding the unlock button for 3-5 seconds then switching ignition off removing the key and try the central locking

Oct 29, 2009 | 1991 Peugeot 405

2 Answers

Key fob wont work on my Peugeot Expert


Does the battery need changing on the key fob?
you can check by using you'r mobile phone cam & pointing the key fob (ultra violet bulb) at the lens when pressing the button, you should see the light flashing on the key fob looking through the camera, you can use any camera, most of them will see the light as it's out of our sight range but cameras pick it up.
If not then unscrew the key fob & split it carefully (use an old credit card not a knife or screwdriver) & change the battery.
If the fob work's then the problem is with the receiver, usually up by the rear view mirror.
Hope this help's !

Sep 21, 2009 | 2005 Peugeot 405

2 Answers

307 central locking fault


If you have replaced the battery and the ecu wasn't in sleep mode, then you'll lose the synchronisation between immobiliser and fob. go to peugeot dealer or call out a car locksmith who then can reprogram your fob with car ecu. I have read the method in internet but not sure what the steps were. you can google it may be you'll find it.

Jun 28, 2009 | 2005 Peugeot 405

3 Answers

I need to reset my peugeot 406 key fob


Had same trouble with my 406, fixing no problem, with new battery in fob, insert into ignition, turn key, BUT DO NOT START ENGINE, hold button for about 10 seconds release button and remove key from ignition, then try and see if doors lock on remote, if not try again, had to do this a couple of times, and it worked, sorry to say that now my key fob button has completely fell apart, through ware and tare

May 19, 2009 | 2005 Peugeot 405

Not finding what you are looking for?
2008 Peugeot 207 SW Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...