Question about 2008 Chevrolet Impala

Open Question

Diagram of 2008 impala v6 3.5 flex serpentine belt

What is diagram and tensioner located

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ZJLimited
  • 17970 Answers

SOURCE: need diagram for serpentine belt for 2004 chev

For an 2004 CHEVROLET IMPALA - V6 3.8L 231ci GAS FI N K

Belt Routing Diagram Multiple Accesories
95d27a1.jpg

I dont know if this is your model engine, so, in DAYCO Catalog you can find other engine too.

I hope help you with this. Good luck ( remember rated this help).

Posted on Oct 09, 2009

greg_margo
  • 1959 Answers

SOURCE: need a diagram for a serpentine belt on a 2005

Below is the diagram you requested. Best of luck on your repair.
Greg
43c72e0.jpg

Posted on Nov 04, 2009

  • 1 Answer

SOURCE: i need a serpentine belt assembly guide or diagram for a 2006 3.5 liter v6 chevrolet impala

Diagram 9-5 on this page:
http://www.daycoproducts.com/daycoweb.nsf/Serp%20Rout%20Guide%20Illus.pdf

Posted on Nov 14, 2009

  • 227 Answers

SOURCE: need the serpentine belt diagram for a 2004 impala

Auto zone web site has free online repair guides. www.autozone.com. You will have to set up an account but it is free.

Posted on Sep 04, 2010

Testimonial: "thank you for your help !"

  • 335 Answers

SOURCE: I need a diagram for

Hello and welcome. here is a picture of the correct belt routing.


17fcb6d.gif

Posted on Oct 06, 2010

Testimonial: "Thank You"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Removing the Serpentine Belt


Tensioner is either on alternator or power steering pump. release tension and remove belt. draw a diagram if you do not have a manual or indicator chart under bonnett

Dec 10, 2012 | 2008 Jeep Wrangler

1 Answer

Replace water pump belt on a 3.8 chevy impala


You will have to 'untension' the serpentine belt first. Then to reinstall, put the belt on then loosen or 'untension' the belt tensioner. Very simple process. The belt tensioner is the first thing and the last thing you touch when changing the belt. The tensioner will apply tension to the belt after install.

Oct 23, 2011 | 2004 Chevrolet Impala

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    Need diagram for serpentine belt for chevy imo l s 2003


    Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 Chevy Impala.

    http://www.2carpros.com/car_repair_information/year/2003/make/chevrolet/model/impala/2003_chevrolet_impala_drive_belt_routing_diagram.htm

    GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
    A. Find the Tensioner(s). (See Diagrams on Link)
    B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
    C. Remove the loosened belt off one of the other more easily accessed Pulleys.
    D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

    Standard Rules for Installing the Serpentine Belt with Tensioners:
    a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
    b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
    c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
    d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
    e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

    Mar 30, 2010 | 2003 Chevrolet Impala

    1 Answer

    Serpentine belt position


    Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 Chevy Impala.

    GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
    A. Find the Tensioner(s). (See Diagrams on Link)
    B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
    C. Remove the loosened belt off one of the other more easily accessed Pulleys.
    D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

    Standard Rules for Installing the Serpentine Belt with Tensioners:
    a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
    b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
    c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
    d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
    e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

    Mar 30, 2010 | 2003 Chevrolet Impala

    1 Answer

    2002 3.8 Impala LS..Where can I find a diagram to install a serpentine belt. What size is the tensioner nut, and where is it located?


    I have 6 vehicles. I own a repair manual for each one. If you are going to do your own mechanic-ing you need books!

    Mar 06, 2010 | 2002 Chevrolet Impala

    1 Answer

    Serpentine belt diagram


    2d3e45c.jpg6ff154a.gif check out the diagram settings. First you locate the tensioner pulley, which is the black plastic pulley below the alternator pulley. Then put a 15MM socket with long breaker bar and turn clockwise as you are facing the motor. It will be hard, there is about 120lbs of pressure on it, but you will move it. Have a helperremove the old belt and immediately follow it with the new belt in the same route. Release the tension, done

    Nov 20, 2009 | 2004 Chevrolet Impala

    1 Answer

    How can i replace the serpentine belt on 2001


    it shouldnt be a bolt it should be a tensioner. i dont think you should be taking bolts off. find the tensioner it will wither be like a 15 mm bolt that is used to move the tesioner or a 3/4th inch breaker bar slot/ratchet slot. you may also want to see at autozone or napa ect if there is some special tool you need for that tensioner.

    May 06, 2009 | 2001 Chevrolet Impala

    Not finding what you are looking for?
    2008 Chevrolet Impala Logo

    Related Topics:

    207 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    74945 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7697 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...