Question about 2004 Suzuki Verona

1 Answer

Fully warmed up; blowing hot and cold; Suzuki XL-7

2001 Suzuki XL-7. Fully warmed up. Heater temp set to full hot. Other heater controls doesn't matter. Upper vents, rear heater vents, and driver side lower vent blowing plenty of warm air. Passenger side lower vent blows only cold; as in outside air temp cold. Craziest thing. Any ideas? Thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 318 Answers

Its just a vent damper plate not operating, it's like a gate which controls the flow of air,,usually they are operated by vacuum, or cables.
Service center time, unless you are handy with your own repairs.

Posted on Jan 19, 2009

2 Suggested Answers

  • 45 Answers

SOURCE: 2001 Suzuki XL-7. Heater blows hot one side, cold the other.

No ductwork [to the lower vents] under the dash. They are part of the heater core / blower housing is integrated (all one piece).

After reviewing shop manual, we suspect that one of the three damper flaps is not positioning correctly; or debris has blocked one side (which makes more sense given the symptoms).

We're waiting for the temperatures to get back in the plus numbers to check out the physical arrangement.

Posted on Jan 21, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater temp on high only bows luke warm air after driving. A/C works just fine.Plenty of cold air from it


heater blows cold air idle chrysler 300 Questions & Answers ...

www.fixya.com > Forum > Tags
Find solutions to your heater blows cold air idle chrysler 300 question. ... blow warmair for a few mins then back to luke warm. i replaced thermostat ... HEAT BLOWSCOLD AIR WHEN IDLING ONLY GETS HOT WHEN START DRIVING ... About 15 minutes after driving the diver side vents start blowing straight cold air but the ...

Heater only works when pressing the gas? - DoItYourself.com ...

www.doityourself.com/...repairs.../459521-heater-only-works-when-pres...
Nov 3, 2011 - When I press the gas, the air from the vents is nice and hot. .... So am Idriving a car with a ton of problems, or could the power steering ... Just anotherquestion, when warmed up does the engine temperature ... When the heater is on and I'm not pressing the gas pedal, luke warm air blows from the vents.

Heater blows cool air when stopped and warm air while ...

https://www.reddit.com/.../heater_blows_cool_air_when_stopped_...

RedditFeb 12, 2014 - Heater blows cool air when stopped and warm air while driving 2008 Kia Spectra (self. ... just fine but appears to blow cool air when I was stopped at a stoplight. ... My temp gauge would also be pegged high when at idle / low RPM. ...thermostat only blocks coolant going to the radiator, and the heater core, ...Missing: 300m ‎luke

Why is My Car AC Blowing Hot Air? - BlueDevil Products

gobdp.com/blog/car-ac-blowing-hot-air/

Jan 27, 2016 | 2000 Chrysler 300M

1 Answer

I have a 2005 hyundai elantra heat blows cold air i changed thermostate and radiaor and blew out the heater core any sugestions


check to make sure the blend door is changing from cold to hot. With the engine off and the key in the run position set the blower motor to the highest speed. Turn the temp dial to full cold and wait 30 seconds. Now turn the temp dial to full hot a listen carefully. You should hear a difference in sounds as the blend door sweeps through its full range.

If it is working and the engine is fully warmed up feel the heater hoses where the pass through the fire wall. One should be very hot and the other should be pretty warm. If one is hot and one is significantly cooler than either the heater core is plugged or there is air in the heater core causing a block in flow.

Jan 07, 2016 | Hyundai Cars & Trucks

1 Answer

1995 saturn sl2 heater blows but doesn't get hot


Could be several things. First, when car is fully warmed up, open hood and feel your two heater hoses coming out of firewall. Make sure your heater control is on hot, both hoses should feel hot. If only one is hot, your heater core inside heater case is either restricting flow (clogged) or an air pocket is restricting flow in your coolant(need to "burp" system-get all the air out of your cooling system) . If heater core is good, and circulating good, then you may have a temp. control door that is inoperative under dash, and not allowing air to move over your heater core. Good luck.

Oct 23, 2011 | 1995 Saturn Sl

1 Answer

My heater fan turns on before the car has warmed up. It blows cold air? Any ideas why?


After warmup it still blows cold, or only when cold? Normally the fan will operate independently of engine temp except in some climate controlled vehicles. As long as it blows warm air after engine is at temp that's a good thing. the heater uses hot water from the engine. Obviously the heater can't be warm before the engine is. If it's cold after the engine is hot, there are vacuum controlled "motors" on top of the heater box under the dash that move doors that control heat. Either one of the control motors or one of the doors have stuck or failed. Many also have a control valve on one of the heater hoses under the hood as well. If the engine comes up to temp then the thermostat is good (should be at about 210f) Only remaining item is the core itself which may be internally or externally obstructed.
All this being said, if it's good when the engine is up to temp, leave it alone...it's fine.

Nov 30, 2009 | 1996 Jeep Grand Cherokee

2 Answers

Ford ka blows hot air even set at cold


sounds like heater control valve situated under scullle panel common fault on ka set heater fan switch half way between hot and cold with heater blowing then touch valve if pulsing or clicking noise it is faulty if doesnt solve problem faulty switch

Jun 07, 2009 | 1999 Ford Taurus

1 Answer

2002 GMC Yukon blows cold air from the front, rear works fine


check you antifreeze level and make sure its full

Jan 26, 2009 | 2002 GMC Yukon XL

1 Answer

2001 Suzuki XL-7. Heater blows hot one side, cold the other.


No ductwork [to the lower vents] under the dash. They are part of the heater core / blower housing is integrated (all one piece).

After reviewing shop manual, we suspect that one of the three damper flaps is not positioning correctly; or debris has blocked one side (which makes more sense given the symptoms).

We're waiting for the temperatures to get back in the plus numbers to check out the physical arrangement.

Jan 19, 2009 | 2001 Suzuki Xl 7

1 Answer

Heater only blows hot (well, warm) on full speed of fan


Replace the temp control on this car, it should be electrical control not cables.

Dec 03, 2008 | 2000 Ford Escort

Not finding what you are looking for?
2004 Suzuki Verona Logo

Related Topics:

1,014 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...