Question about 2003 Volkswagen Eurovan
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2003 VW Jetta Serpentine Belt
is it a squeal noise or what? explain more in detail. and yes the belt is directional in that it's path is designed to run in one direction only, no matter which side you put on the belt itself, the belt can be installed in one way or flip it over to the opposite side...doesn't matter, only matters if you installed it correctly on the routing of the belt. And the grooved edge is to be facing down inside the main pulley's that have grooves. If you have the smooth side down into the pulley grooves, remove teh belt and turn it inside out so that the smooth side does not ride inside the grooves of the pulleys.Sometimes, the tensioner pulley will squeal or the idler pulley will squeal when they are going out. If you are actually hearing the fan come on and off, that's normal, the fan is set up to turn on and off according to engine temperature and some cars they continue to run for a bit after ignition is turned off as well to cool the engine down. check to see if the belt is set all the way on all the pulley's it rides on and not partly off on the edge, realign as needed.
Posted on Oct 13, 2008
SOURCE: Replacing serpentine belt
try these websites to see if they have your car listed it www.autozone.com and www.alldatadiy.com also try these website to see if you can get a diagram its www.webcrawler.com and for the most part they should be a diagram under you hood showing you how to install your new belt.
Posted on Jun 07, 2009
P0011 - Intake camshaft position timing ( over advance bank 1 )
O0420 - catalyst system efficiency below threshold bank 1. Hope this was helpful.
Posted on Dec 02, 2009
You have to get to it from under the car. Remove the plastic cover piece. There are 5 bolts that need to be loosed to tighten the belt. The bolt at the top of the bracket, the two pivot bolts going into the pump, 1 bolt that is up in the rear bracket of the pump, (bracket bolts to the block) and the bolt that holds the tensioning adjusting bolt on the front of the pump bracket. Turning the long bolt adjusts the position of the pump. All bolts should be 13mm head bolts. The "hidden" bolt on the back bracket xan be reached by using a deep well 13mm socket and a 3 inch extension. The others with a wrench or socket.
Posted on Mar 14, 2010
Tips for a great answer:
Sep 22, 2010 | 2003 Volkswagen Eurovan
Aug 08, 2010 | 1993 Volkswagen Eurovan
Jun 08, 2010 | 2003 Volkswagen Eurovan
Mar 23, 2010 | 2003 Volkswagen Eurovan
Oct 12, 2009 | 2003 Saturn VUE
Sep 02, 2009 | 2001 Volkswagen Eurovan
Jul 07, 2009 | 1993 Volkswagen Eurovan
Jun 07, 2008 | 2003 Volkswagen Eurovan
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: