Question about 1998 Hyundai Elantra

Open Question

How to remove rear rotor elantra 2008 - 1998 Hyundai Elantra

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bluelightnin
  • 35 Answers

SOURCE: 2005 elantra need answer on removing rotors

REMOVAL:
Loosen the wheel nuts slightly. Raise the front of the vehicle, and make sure it is securely supported.
Remove the front wheel and tire from front hub.
Remove the split pin, then remove castle nut and washer from the front hub while applying the brake.
Remove the caliper mounting bolts, and hang the caliper assembly to one side. To prevent damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper from the undercarriage.
Remove the wheel speed sensor from the knuckle.
Disconnect the tie rod end ball joint from the knuckle using the special tool (09568-34000).
Remove the split pin.
Remove the castle nut.
Disconnect the ball joint from knuckle using the special tool (09568-34000).
Remove the lower arm ball joint mounting bolts
Remove the strut lower arm mounting bolts
Remove the hub and the knuckle assembly


INSTALLATION:
Reverse the order of the removal procedure.

Posted on May 23, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset glass in rear door 2008 elantra


You will need polyeurothane sealant and a scraper... After rem

Apr 24, 2014 | 2008 Hyundai Elantra

1 Answer

Can'tremove the rotors on my mitsubishi 2008 Eclipse Spyder GT. What am I missing


Brake Rotor Removal & Installation Front Front brake caliper & rotor removal/installation mitsubishi-09-00-7842.gif

Rear Rear brake caliper & rotor removal/installation mitsubishi-09-00-7843.gif

prev.gif next.gif

Jul 31, 2010 | Mitsubishi Spyder Cars & Trucks

2 Answers

How do I remove front rotors from a 2003 hyundai elantra


First jack the front end up. Then remove the wheels. Then remove the calipers. Then the rotors should fall right off the car into your hands. They are not pressed on or hubs

Jul 16, 2010 | Hyundai Motor 2003 Elantra

2 Answers

2008 elantra suspension clunks in the rear


depending on mileage and relationship you have with your dealer, the rear struts may still be under warranty. 24,000 miles if i remember right. those are your issues. replace the rear struts. cheers

Jan 22, 2010 | 2008 Hyundai Elantra

1 Answer

Fog lamp replacement on 2008 elantra


1. Disconnect the negative (-) battery terminal. 2. Remove the front side cover screw. 3. Remove the front fog lamp assembly connector (A).

38eda8f.gif 4. Remove the front fog lamp bulb (A).

20279ba.gif

Jun 20, 2009 | 2008 Hyundai Elantra

1 Answer

2003 hyundai elantra brake rotor removal


if there are screws holding rotor on remove them.you can drill the heads of if you need to they realy dont do any thing remove caliper bracket if its in the way some rotors have drilled and taped holes in them if yoursn do thread bolts into them and tighten down this will put pressure on the rotor to pushit of hub if not use large hammer and hit the face of rotor between studs to loosen it up also dont be afraid to use lots of wd40 of so sort of penatrating oil on them to help loosen them up let me know how you make out

May 31, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Need to change rotors on my car


All your major auto parts stores have web sites that can help you with your project with instructions and diagrams. Also i think chiltons has a web site to.

Apr 01, 2009 | 2006 Hyundai Elantra

1 Answer

Possible rear bearings


take drum off,cap and center bolt off hub bearing assembly,pull hub out install new one

Feb 25, 2009 | 2001 Hyundai Elantra

1 Answer

How do you get rotor off 2003 hyundia elantra


hi from uk not sure if same as uk hyundai's but here goes ? if you remove wheel do you see two countersunk posi screws between studs that appear to hold rotor ?? if so then you will have to first remove the brake caliper assy by unbolting from the rear of caliper two 13 mm spanner/socket ? then you remove the two bolts that secure the carrier that the caliper bolts to 17 mm spanner/socket now you can remove the two contersunk screws then you may have to tap the rotor off the hub from rearuse a wire brush to clean up/away all rust/dust from caliper and carrier assys b4 refitting (take precautions from breathing dust) i assume you are fitting new pads ?? reassemble carrier then b4 fitting pads smear a light coating of copper grease on the rear of pad (metal side ) this prevents squealing on brakes then fully reassemble then b4 fitting wheel? bleed the brakee caliper a couple of pumps should expel dirty fluid then fit wheel carry out same proceedure on other brake assy as above fully then b4 you move car pump brake to ensure pedal is firm you will find that bleeding brakes will make pedal firmer as the old fluid becomes compressable due to heat/moisture absorbsion over time and heat from brakes is transferred to fluid via caliper piston understand?? that is why alway policy to bleed/flush brake fluid at least two yr interval this reduces spongy brake pedal hope this is all clear 4 you to follow best wishes for new year and hope you update on how you go on??

Jan 10, 2009 | 2004 Hyundai Elantra

Not finding what you are looking for?
1998 Hyundai Elantra Logo

Related Topics:

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...