I drilled out the metal rod holder bracket and made my own up It's a threaded barrel with a bolt screwed in and some washers for spaces to grip it
It sounds like the connecting rod popped out of its plastic connector. Pull the door panel off and check both ends of the rod. It must be unhooked at one end or the other.
SOURCE: vauxhall vivaro wont start cold
Sounds like a faulty cold start assistor. On top of the engine you will find an aluminium housing with four things that look like glow plugs screwed into it. These 'glow plugs' are only available complete with the housing fron Vauxhall. Approx £70 +
Airbag light is probably a fault with the seatbelt pretensioner.
Check the wiring under the seats for damage or perhaps the plugs have pulled apart.
SOURCE: vauxhall vivaro 1.9 dti 53 reg steering wheel shakes when i brake
Hi got a vauxhall vivaro 54 plate and the power steering is only workin when i turn left anyone got any answers for this one cheers
SOURCE: Where's my fuel filter located
opel vivaro ,its a belly tank and its mounted amidships ,about time they dropped the vauxhall and the holden names ,havent got a 1960s rust bucket cresta laying around in the garage have you ?? or a MkIV zodiac executive ,swop for a 1956 morris oxford ???
SOURCE: Driver's door won't open inside
Hey, You need to remove the panel otherwise u can't reattach the metal sticks that move the locks, but i think it's hard to remove it in a closed posision when u don't brake it
6,797 views
Usually answered in minutes!
hi i locked my van and now i can not open the side or back door, the two front doors open fine but the side and back are not responding, i also have a bulk head behind the seats so i can not get in to the back of the van at all any thoughts would be a great help????
×