Question about 2003 Volkswagen Jetta TDI

1 Answer

2003 jetta radio display SAFE

I installed a new radio it will not alow me to enter the security code what do i do to be able to enter the code

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You need to git vin # from car to get the radio code, i ended up putting a aftermarket radio in instead, alot less headache, also they sell a wire harness to adapt to it,easy as plug n go, real simple

Posted on Jan 13, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: change my 2003 VW jetta battery

a lot of the vw cars don't have coded radios but in the case that you do loose it call your local dealership and have your chassis number and number plate and they should give it to you over the phone....but i dont think it will come to that..goodluck

Posted on Jun 19, 2009

  • 257 Answers

SOURCE: Hi, problem with 2007 VW Citi Golf radio security code.

The radio is in Lock-Out mode. You only get two attempts to enter the code, then it enters Lock-Out mode.
Put the key in ignition and turn on the radio for an hour (maybe a bit more). The radio should reset itself after about an hour and then you can re enter the code.

Posted on Jul 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 jetta radio says 2 safe, what do I have to do to reset the radio in order to get it working again?


Now you must turn ON the radio, and let it turned ON for at least one hour. Then the radio will say only "SAFE".

IMPORTANT NOTE:
You must have the security anti-theft code for your Volkswagen radio from the car manufacturer, or from a Volkswagen dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for a 2004 VW Jetta radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Aug 31, 2011 | 2004 Volkswagen Jetta

1 Answer

My radio is in safe mode after the battery got drained


IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!


Or you can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 1994 VW Jetta radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Apr 14, 2011 | 1994 Volkswagen Jetta

1 Answer

How to reset the stereo jetta tdi 2001


IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!

You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2001 Volkswagen Jetta 1.9 TDI radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!


Please do rate my response. Thanks!

Feb 23, 2011 | 2001 Volkswagen Jetta TDI

1 Answer

I have a 99 vw passat. Retrieved unlock code from dealer via serial number. When I enter code the radio makes a static type sound and goes right back into safe mode.


IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!

The sequence of programming for VW radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Jan 06, 2011 | 1996 Volkswagen Jetta

1 Answer

Unlock radio instructions


IMPORTANT NOTE: You must have the security anti-theft code for yours radio from the car manufacturer! The sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Aug 19, 2010 | 2005 Volkswagen Jetta

1 Answer

Je possède une jetta 1997. j'ai un problème avec le code de la radio. Je fais "Mode Scan" et par la suite le chiffre 1000 apparait. Mais je ne suis pas capable de changer les chiffres pour entrer...


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Aug 15, 2010 | 1997 Volkswagen Jetta

1 Answer

I need radio code for 1997 vw jetta radio model# 1hm 035 180 B Serial # 12247


IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer! For VW radio the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Jul 13, 2010 | 1997 Volkswagen Jetta

2 Answers

2007 vw jetta radio code please!!!


Send the request via email through this site these guys can help or go back to dealer and get them to get it for you.
http://autoforum.classifieds1000.com/Volkswagen-Quantum/2007_VW_golf_radio_code
Below is procedure once you have the code:

* Turn on radio -- the word "SAFE" will be displayed.

* First press the MODE button and then press the SCAN button and hold them down simultaneously until "1000" appears in the frequency display. Release the buttons. Do not, under any circumstance, continue holding the buttons down or press them once again. This would cause the radio to take the number "1000" as the code number.

* Using the first four radio station buttons, enter the code number found on your Radio Card. Use button 1 to set the first digit of the four digit code, button 2 to set the second digit, etc. The first digit of a four digit code must be "1". If your code number has three digits, the first digit on display must be set blank.

* Once the code is shown on the display, press and hold the MODE button and SCAN button simultaneously until the word "SAFE" appears in the frequency display. Release the buttons. A radio station frequency will automatically be displayed. The radio will now play once again.

If, when cancelling the electronic lock-up, a wrong code number is entered by mistake, the word "SAFE" will appear in the frequency display first blinking, and then continuous.

You can now repeat the entire cancelling procedure but only once. The number of attempts will be shown in display.

If the wrong code number should be entered again, your radio will be locked up for approximately one hour. The radio will not play. Leave the radio switched on. After an hour, you can cancel the electronic lock-up as previously described.

This cycle, two attemps - one hour lock-up continues again. //

May 30, 2010 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

Cant switch on radio - says: ''code 1''


The radio alarm has been tripped. Any loss of power to the system will cause this to happen. It wants you to input the 4 digit code to reset the radio. If you do not have it, you can pull the stereo and get the serial numbers, and ask the VW dealer for the code. It should be free info if you supply the serial numbers.
With the power on and SAFE showing on the display, press and hold the MODE and SCAN button together until SAFE changes to 1000. Release the buttons and using the first four station buttons enter the radio code.
Use button #1 to change the 1 to the correct code, pressing once will change to 2 twice to 3 etc
Use button number 2 to change the next number etc.

When you have entered the correct code; press and hold the SCAN and MODE buttons together until code disappears and radio comes on.
I hope this may help.
Good Luck!

Feb 21, 2010 | 2003 Volkswagen Jetta TDI

1 Answer

I installed a new battery in my 2004 Pasatt. Now


Your radio is probably showing up SAFE in the display because you disconnected the power supply. On this particular vehicle you have to re enter a security code to get the radio to work again.

You may find you have this security code somewhere in your service documentation or owners manuals if you have them. From the factory it is printed on a small card which often gets lost as the vehicle changes hands.

If you have lost thos code you can only obtain the code from a dealer by

1) Removing the stereo and getting the serial no that is stamped or printed on the back of it

2) Bringing this serial along with your cars VIN identifier (Chassis no) to a VW dealer who will run the numbers and give you the code you need to unlock the stereo.

Hope this helps.

Don't forget to rate my answer.

Jul 04, 2009 | 2003 Volkswagen Passat

Not finding what you are looking for?
2003 Volkswagen Jetta TDI Logo

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...