Question about 2007 Nissan Altima 2.5
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a cable that attaches to the inside door latch release handle. The plastic that retains this cable is most likely broken. I have seen this before. If the retainer is not holding the cable sheath correctly, the entire cable moves when the handle is pulled and does not release the door latch.
Remove the door panel and inspect this cable. You will see 2 cables (one is for the door lock). If the plastic is broken, you will need a new interior handle assembly.
Hope this is helpful!!
Nissan Scope Technician- 10+ years experience in Nissan dealership
Posted on Nov 11, 2008
SOURCE: won't open my door when
can you manually unlock the lock and open the door?? Is it more than one door or just one specific door? If its just one door, yourcactuator inside the door may be bad or you have a wire issue. If its all the doors, more than likely you blew a fuse or a relay(id say fuse)
Posted on May 23, 2011
SOURCE: my driver's side door lock
your problem sounds like the door lock actuator motor has failed this is located behind the door panel, you can test for power and ground at the actuator while pressing the remote buttons if power and ground are present replace the actuator
Posted on Jul 31, 2011
SOURCE: 2004 frontier doors won't open
You might need new pins and bushings for the door, which cost under 15.00 if it is starting to stick. If the door will not open at all, check your inside door handle. Is there any tension when you pull on it? or does it pull really easy? If it pulls really easy, you will need to take the door panel off and see if the door rods are still in place. Sometimes they can come loose and need to be put back in. Or they could be broken. Either way, these are easy fixes, just take to the nearest auto body shop or mechanic shop to do so.
Posted on Aug 30, 2008
linkage on inside of door has come undone. take off inside door panel and you will find a small rod that goes to the lock mechanism where the door closes opposite the hinges. follow the handle to the door lock.the nylon bushing may have broken.they are cheap to purchase at auto part stores.
Posted on Apr 21, 2009
Tips for a great answer:
Apr 21, 2013 | 2001 BMW X5 3.0i
Mar 17, 2013 | 2002 Toyota Sienna
Jul 17, 2012 | Ford Cars & Trucks
Jul 08, 2012 | GMC Cars & Trucks
Mar 19, 2012 | 2009 GMC Acadia
Mar 14, 2012 | 1997 Mercury Mountaineer
Feb 29, 2012 | 2006 Ford Fusion
Jun 10, 2011 | 2006 Buick Lucerne
May 25, 2011 | Hyundai Accent Cars & Trucks
Feb 16, 2014 | 2007 Nissan Altima 2.5
734 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: