Question about 1997 Chevrolet Astro
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you have to read out the codes. po300 is misfire detected. maybe a coil or injector. could also be intake leak
Posted on Nov 15, 2008
you may have to drive it several days for the light to go off, or have the codes cleared. personally I would just drive it. if the computer tests it, and it passes the test, it will go off on its own.
Posted on Sep 21, 2009
When the light comes on without flashing, it just means an emissions problem, when it starts to flash it has become more serious. I suspect that there was an error putting the plugs and or wires. That computer can determine if there is a misfire and it will put out a P040X, code where X represents which cylinder is the problem. This will help you not have to take each one apart. If there are more than one, check each number.
Ex. P0401 means there is misfire on cylinder number 1
P0400 is a random misfire detected.
If you take it to an Advance or Autozone they will usually scan if for free.
By the way, if you used cheap plugs instead of platinum plugs that could do it too.
Hope this helps.
Posted on Nov 25, 2009
You need to get the fault codes read to determine where the problem is that set the SES light. Autozone will scan your car at no charge. At some point you will need to get a mechanic involved to further diagnose the codes.
Posted on Sep 25, 2010
Tips for a great answer:
Sep 24, 2014 | 2003 Chevrolet TrailBlazer
Mar 13, 2013 | 2002 Chevrolet Astro
Feb 10, 2011 | 2002 Chevrolet Astro
Mar 03, 2010 | 1994 Chevrolet Astro
Aug 18, 2009 | 1995 Chevrolet S-10 CA Edition
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: