Question about Cars & Trucks

Open Question

Torque sett kia 2.70 diesel 1.3 ton - Cars & Trucks

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6982 Answers

SOURCE: Looking to buy used 1 ton van. I would like to

350 engine should be about 160hp and about 255ft lbs@2400rpm Hp numbers are actually higher than what is advertised but vary somewhat because of differences in measuring methods (at flywheel at trans tailshaft, at rear wheels) values also change depending upon compression ratio and if carbureted 4bbl or 2bbl or if injected (throttle body) Numbers are only related to a "fresh" engine under lab conditions. Performance regarding the work you will ask the vehicle to do depends largely upon gearing more than engine displacement unless you are comparing a four cyl engine to a big block or diesel. Most important is how well the vehicle was maintained and how well it is running. (never fall for "it just need a tune-up"...that can sometimes mean there is something wrong and we cant' figure it out)
I don't have diesel numbers but generally diesels have much more lower end torque, as per design. I know what you asked has not been fully answered here. In reality you should not try to compare the two. Likely both will do the job quite well. Diesels tend to go longer in the life dept, smallblock chevy engines are likely the most "perfect" V8 engine ever designed, having only one design flaw stemming from the fact that the valves should have been moved outboard a bit in 1957 when a larger cam was used when the displacement changed from 265 to the original 283 (same placement carried on to present)
Hope this helped and didn't confuse you more!!!

Posted on Nov 17, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia shuma 2000 model 1500 torque specs of big ends please


Big end torques

Stage 1 torque 30 - 40 Nm

Stage 2 torque 64 -69 Nm

Main bearing torques
Stage 1 27 - 30 Nm
Stage 2 54 - 59 Nm
In case you need any other torques I have included a picture of them all


image2-u0ifkbtdyy2z0oq10ddfwmtn-5-0.jpg

May 29, 2017 | Kia Cars & Trucks

1 Answer

What is torque settings for head bolts on Kia pregio 2001


What are the cylinder head torque settings for a KIA K2700

www.answers.com > ... > Categories > Cars & Vehicles > Asian Cars > Kia
What is the torque specification for the cylinder head on a 2002 Kia Sportage? ... the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs. ... Thehead bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per ...

Aug 17, 2015 | Kia Cars & Trucks

1 Answer

Kia prigio cylinder head tourqe


the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs.

Jul 10, 2013 | Cars & Trucks

1 Answer

I need the torque settings and pattern for a Kia carnival diesel


I presume you are after the cylinder head settings. These are for the 2.9crdi engine, if you need any others you will have to let me know the year and engine size.
.

Jan 30, 2013 | 2006 Kia Carnival 2.7

1 Answer

Kia Ceres 2.4litre diesel engine torque settings


go google , type in torque settings for Kia Ceres 204 ltr engine and there will be pages giving you the settings and the tightening sequence.

Oct 03, 2012 | Kia Cars & Trucks

1 Answer

I have a 95 chevy pick up with 6.5 diesel engine and converted to gasoline engine witch is 5.7 vortec engine and change all the wire harness inside the cab and engine compartment. Trying to figure out the...


Hi :) Check the wiring harness for a fuel pump relay that is on the firewall. The trans is computer controlled (shift points, firmness, ect). You would either need to run a TBI motor from a '92-95 3-4 or 1-ton truck and get the computer to go with it. Then the new gas computer can run the trans. You will also need to swap the torque converter to a gas unit instead of the diesel. OR get whatever motor you want, and then use a stand-alone controller for the trans. They cost about $600+ for the controller. Still need to do the torque converter. You could run the diesel TC but it just wouldn't perform to full potential.It will bolt up, but a diesel transmission is different from a gas transmission. Diesels shift way earlier and only go to 3500 rpm max. If yo u do the engine swap, you will need a new valve body in the transmission. I have a 700R4 in a 1935 Ford truck. It never shifted right unless I drove it manually. It always bogged down. I took the transmission to 5 different shops and no one could figure it out. After 6 years, I was telling a buddy about it and he had me bring it to his shop. He changed the valve body (was a diesel trans and I didn't know when I bought it at an auto swap) to a corvette valve body and now the truck runs great.

Mar 29, 2011 | Chevrolet K3500 Cars & Trucks

1 Answer

Kia sportage torque range setting for cylinder head


alloy head petrol then its about 80lbs .diesel around 90 to a 100 not sure their as i just pull any head bolt down till i feel the bolt stretch but i wouldnt advise anyone to do it my way unless its another mechanic ,you know the sort of thing with a few mechanics taking the rise out of one and other ,like what do you want the torque wrench for ,you a weekend mechanic or what .

Aug 02, 2010 | 2001 Kia Sportage

1 Answer

What is the torque trquirement for the 1975 chevy 1/2 ton SB truck. there are 6 bolts on each side.what is the torque setting for the upper and lower control arms on sam truck?


For the upper:

  1. Installation is the reverse of removal. Before tightening the nuts to 70 ft. lbs. (95 Nm) for 1/2 ton trucks, or 105 ft. lbs. (142 Nm) for 3/4 and 1 ton models. Have the front alignment checked, and adjusted.

For the lower:

Tighten the U–bolts to 45 ft. lbs. (61 Nm) for 1970–75 1/2 ton trucks, to 110 ft. lbs. (149 Nm) for 3/4 and 1 ton models; all other trucks tighten to 85 ft. lbs. (115 Nm). Have the front suspension alignment checked.

Mar 07, 2010 | Chevrolet 1500 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...