Question about Nissan Altima

Open Question

Nissan altima brake switch problem

Have had problems with the car not starting, several times a month. It would turn sometimes, now will do nothing.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 373 Answers

SOURCE: 2003 altima nissan

HI. I read your problem.
Let me ask you,
The sensor that you are installed are from the dealer or aftermarket?
Because the crank sensor on a 02 to 06. altimas where defectives. or damaged to fast.
Is why NIssan company Made a complety diferent new sensor.
Trying to resolve this problem.
If you haven't get from the dealer, I recomment get one from them. When you see the connector on inverter position don't worry it will fit.
But if you install from the dealer. I recoment check the engine for high vibration.
Check the crankshaft for end play.
And check the wires from the sensor for short, or burned shield.

OK> I hope this work for you..
I have changed few of them..

Posted on Jul 14, 2008

  • 5 Answers

SOURCE: Problem wtih starting car

The second switch is a relay.  Once you depress the brake pedal it closes the circuit and allow power to flow the starter so that when you push the start button it turns and starts your engine.  The contacts in relays after a while will start to ware out or start to pit just like points in the older cars and it could not make contact to close the loop with in the circuit which will result not starting.  

Posted on Mar 09, 2009

  • 139 Answers

SOURCE: dashboard warning brake light stays on continuosly nissan altima

Try this, Since you are applying the hand brake. Manually pull up on the emergency pedal and see if the light goes out. If this does work then you could have one of several problems. but, I am thinking that you might be able to adjust the brake tensioner if this car has one.

Posted on Jul 05, 2009

  • 137 Answers

SOURCE: 06 nissan altima won't start.

weak battery and check that the altanator is working

Posted on Jul 11, 2009

  • 1 Answer

SOURCE: brake lights will not turn off on my 94 Nissan Altima

Your problem should be that the rubber stops that are mounted at the top of your break pedal came out or are worn down too much to press the buttons all the way in.
What they do is push the button that switches off your break lights when the break pedal is released (yes, kind of backwards way to design it, i know). That's why your lights stay on even when your car is off. I had to go to the junkyard to find replacements for mine and they are a ***** to replace.
They are chipped away easily by the break switches when your car shakes badly over a prolonged period of time. Like driving a couple of weeks on a bad front tire.

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The brake switch in my 95 nissan altima get hot after several stop and go and went bad. I changed it, and does the same. I have to start the engine in neutral because of that problem. can you h


You probably have a shorted Brake pedal switch under the dash. This is part of the interlock system which is suppose to stop you from starting the car without your foot on the brake.

The switch should be on the brake pedal lever. It is common for feet to hit it and crack, break, or move it out of position. You need to replace and adjust thisimportant part.

I hope my solution is helpful. Often the rear brake lights do not light.

Sep 18, 2012 | 1995 Nissan Altima

1 Answer

Altima loss of clutch on turns


Well, I know nothing specific about your car in particular but ill try to work up an idea. Some systems incorporate the clutch and the brakes using the same fluid. Do you notice anything similar with your brakes?

Jul 23, 2012 | 2002 Nissan Altima

3 Answers

My 2008 Nissan altima will not start sometimes usually it happens when you put your foot on brake before you start it and the brake pedal won't release back does anyone know what the problem is


do the brake lights come on when you press the brake? If not the brake switch is bad. If they do, check your brake fluid. Ive heard of these Altimas having bad master brake cylinders. If your brakes(pads) are good and your fluid is really low, this may be your culprit. Should be covered under warranty.Let me know how you make out.

May 24, 2011 | 2008 Nissan Altima

1 Answer

I have a 2008 Nissan Altima with push button start that will not start when the ignition button is pushed and the brake are being pushed on. The brake indictator light on the instrument panel goes on. I...


When you push the brake pedal do the rear brake lights come on?
Check that next time it does not start.
You may need a simple brake light switch adjustment.

May 03, 2017 | 2008 Nissan Altima

1 Answer

1998 Nissan Altima ...sometimes the engine races for no apparent reason. We were pulling into a parking lot...all of a sudden the engine started racing...first we hit the brake, and could barely hold...


yes,with several makes of car with fuel injection,use a can of redexe/wynns(1 can to 1/2 tank) to clean the fuel lines/injectors of residue.worked for me,but it is also a symptom of several other maladies.

Nov 01, 2010 | 1998 Nissan Altima

1 Answer

2003 Nissan Altima Brake Lights Out


Try checking your bulbs its rare but seen them go out at the same time before sometimes from a electrical spike.keep me posted good luck

May 20, 2009 | 1995 Nissan Altima

2 Answers

Key will not come out of switch on 2003 nissan altima


Try turning the steering wheel into lock position it should release

May 03, 2009 | 2003 Nissan Altima

1 Answer

99 nissan altima 4dr. key will not turn ignition


sometimes if the steering wheel is in a bind the switch will not turn try turning the wheel a bit while at the same time turning the switch good luck

Apr 05, 2009 | 1999 Nissan Altima

1 Answer

1999 Nissan Maxima


do you tink maybe it might be the ignition switch

Feb 04, 2009 | 1993 Nissan Altima

3 Answers

Problem wtih starting car


I had the same issue. It turned out that the break pedal switch was broken. The engine start push button is connected to a second break pedal switch that senses when you push it. That switch is independent from your main break pedal switch that turns on the brake lights of the car.

Jul 17, 2008 | 2007 Nissan Altima 3.5 Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...