Question about Volkswagen Beetle

Open Question

Stripped bolts in oil pan in 73 vw 1600 motor

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1114 Answers

SOURCE: 2001 Concorde 3.2 L Oil Pan Removal

if you have your old drain plug take it to a auto part store get a self tapping drain plug! save big$$$$$ I have installed piles of these they last for ever $5-$20- for one. cheers

Posted on Dec 24, 2008

ewashmidas
  • 362 Answers

SOURCE: stripped oil pan plug

You should replace the pan. Pan saver plugs are for temporary use only.

Posted on Mar 30, 2009

  • 176 Answers

SOURCE: My oil drain plug was stripped from the engine oil

Tighten three oil pan/transmission bolts 45 Nm (33 ft. lbs.) Tighten all bolts oil pan/engine block cross over 15 Nm (11 ft. lbs.)

Posted on Jun 12, 2009

AaronTech
  • 115 Answers

SOURCE: stripped oil pan - 1998 vw new beetle

need to buy a heli-coil kit they come in different sizes. comes with a drill bit to drill out the hole and a threading tool and the coil insert. size it to the original drain plug (buy a new one).

Posted on Jun 26, 2009

c17hydro
  • 2984 Answers

SOURCE: What is the sequence for the bolts on oil pan, for

For the 2.8L there is no sequence. Torque for the bolts are 105 in.lbs.

For the 3.0L torque is 50 in.lbs. in sequence:




40be0ec.gif

30fedd0.gif
For the 3.3L and the 3.8L, no sequence but torque each bolt to 105 in.lbs.

Please don't forget to rate!

Posted on Jul 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How long does it take to replace a oil pump in a 2003 vw jetta


Oil pump: internal (inside oil pan) remove all bolts securing oil pan, remove and reinstall oil pump. Replace oil pan gasket, replace old oil. Approximate 2-4 hrs.
OBD2 iPhone

May 12, 2014 | Cars & Trucks

1 Answer

What is the torque suppossed to be on the motor mounts and the starter mounting bolts on a 2001 chevy malibu V6


Main cap bolt, 396-454 4-bolt (inner/outer) 110 ft.-lbs. 3/8 in. connecting rod bolt 50 ft.-lbs. 7/16 in. connecting rod bolt 67-73 ft.-lbs. Cylinder head bolts, long 75 ft.-lbs. Cylinder head bolts, short 65-68 ft.-lbs. Screw-in rocker arm studs 50 ft.-lbs. Intake manifold bolts (cast iron head) 25 ft.-lbs. Oil pump bolt 65 ft.-lbs. Cam sprocket bolts 20 ft.-lbs. motor mounts 85 ft.-lbs. Flywheel/flex plate bolts 60 ft.-lbs. Pressure plate bolts 35 ft.-lbs. Bell housing bolts 25 ft.-lbs. Exhaust manifold bolts 20 ft.-lbs.

Jun 10, 2012 | 2001 Chevrolet Malibu

2 Answers

Hi I have a 2000 vw beetle I had the oil changed and it all leaking twice as soon as they put it in it came out. Can you help me with this problem.


Have it towed back to the shop, it sounds like they installed the filter improperly or left the drain plug loose.

Mar 07, 2011 | 2000 Volkswagen Beetle

1 Answer

HOW TO CHANGE OIL PAN ON F150


Hi. Here's the procedure on how to change the oil pan.

Things You'll Need:
Drain pan
Crescent wrench
New oil filter
Oil filter wrench
Socket wrench
Socket set
Razor knife
Putty knife
New oil pan
Oil pan gasket
6 qt. of oil
Clean towel

    Draining the Oil
  1. 1 Locate the oil pan directly underneath the engine. The oil pan will be held on to the bottom of the motor by 16 to 18 bolts. The drain plug is at the bottom of the pan.
  2. 2 Loosen the drain plug with a crescent wrench. Allow all the oil to drain in to the pan. Tighten the drain plug when the oil is through draining.
  3. 3 Unscrew the oil filter with an oil filter wrench. Place the oil filter with the waste oil.
  4. 4 Rub new motor oil around the gasket of the new oil filter. Pour 1 qt. of oil in to the filter.
  5. 5 Screw the filter to the filter housing with your hands. Do not wrench-tighten as this will strip the threads and make removal of the filter difficult.
  6. Replacing the Oil Pan
  7. 1 Locate all the bolts holding the oil pan in place. There will be 16 to 18 bolts.
  8. 2 Unscrew all the bolts with a socket wrench. Lower the pan to the ground. If the pan is stubborn, tap it with a rubber mallet to loosen the seal from the gasket.
  9. 3 Scrape clean all the gasket material around the bottom surface of the motor. This will ensure a tight seal with the new oil pan.
  10. 4 Place the new gasket around the new oil pan. Raise the oil pan to the motor and screw in all the bolts. Do not tighten the bolts until all are threaded to the bottom of the motor.
  11. 5 Tighten the bolts with a socket wrench. Ensure that all the bolts are tight.
  12. Adding the New Motor Oil
  13. 1 Open the hood to access the engine compartment. Unscrew the oil filler cap on top of the crankcase. Pull the engine oil dipstick from the tube. Wipe the dipstick clean with a fresh towel.
  14. 2 Pour in 5 qt. of oil in to the engine crank case. Insert the dipstick back in to the tube and pull it back out. Check the oil level against the markings on the dipstick. Fill at 1/2 qt. intervals until the dipstick indicates "Full."
  15. 3 Start the truck and allow it to run for five minutes. Allow the truck to sit for an additional five minutes to allow the oil to drain back to the oil pan.
  16. 4 Check the oil level again. Fill if necessary, but do not overfill.

Sep 21, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

How to install oil temp sending unit


it should be on the side of the motor right above the oil pan possible that it is right next to filter

Aug 01, 2010 | 1998 Volkswagen Beetle

1 Answer

Changing a sump on Jetta IV


You need VW silicone sealant D 176 404 A2.
  • Apply 2 to 3mm (1/8") bead of new sealant to oil pan sealing surface. Be sure to run bead on the inside of the bolt holes.
  • Immediately install oil pan to cylinder block and loosely install M7 bolts diagonally.
  • Install and lightly tighten M10 bolts securing oil pan to transmission.
  • Diagonally tighten M7 oil pan bolt further, but not final torque.
  • Diagonally torque M7 bolts securing oil pan to cylinder block.
  • Oil pan to transmission (M10)... 45 Nm(33 ft-lb)
  • Oil pan to cylinder block (M7)...15 Nm(11 ft-lb)
  • Wait 30 minutes as prescribed and refill with proper viscosity and quantity of engine oil.

Apr 20, 2010 | 2002 Volkswagen Jetta TDI

2 Answers

Stripped Oil Pan -- Oversized Plug?


being age of vehicle not much could do, i would recommend the oversize drain plug which has a plug inside the bolt so dont keep taking out of oil pan

Feb 04, 2010 | Hyundai Motor 2003 Elantra

2 Answers

Stripped oil pan - 1998 vw new beetle


contact any parts store like NAPA, bring the old plug with u and they can supply a repair plug kit.

Jun 26, 2009 | 2000 Volkswagen Beetle

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...