Question about 1997 Mercury Grand Marquis
Check to see if brake lights are working. if the brake swith is bad it wont release the shifter lock when key os on or when running.
Posted on Jan 03, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Solenoid switch,Open hood on drivers side fender you will see the battery cables go to fender semi round looking switch.If you have a screw driver Handel give it a smack or two it should stop you will need to replace this it will do it again!
Posted on Dec 23, 2010
On this model you will have to open glove box and press the tabs on each side so that you can open it all the way open. You will see a 2 wire grey connector behind it.
Turn ignition switch to run postion then take a paper clip or something like that and momentarily short the 2 wires together.
The door locks should then cycle from lock to unlock.Remove the paper clip then press one of the buttons on each remote. When you press the button on the remote door locks should cycle again to confirm that it programed.Then when finished turn off the ignition switch and door locks should unlock to confirm you have exited programming mode.
Posted on Feb 20, 2009
Tips for a great answer:
Jan 11, 2016 | 2006 Mercury Grand Marquis
Dec 12, 2015 | Ford Cars & Trucks
Feb 28, 2013 | 1998 Mercury Grand Marquis
Nov 27, 2012 | 2001 Mercury Grand Marquis
Sep 07, 2012 | 1997 Mercury Grand Marquis
Jul 03, 2011 | 2001 Mercury Grand Marquis
May 01, 2011 | 2002 Mercury Grand Marquis
243 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: