Question about 2006 Honda Odyssey
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 Honda Odyssey
The tracks may be clean but the rollers can get damaged. I found one door with a roller entirely missing. There are several rollers on each of three brackets; top, middle, and lower. For example, the middle bracket has two rollers which rotate axially in the horizontal direction to track the side of the rail---and a vertical roller to carry the weight of the door on the bottom of the track. If any of these rollers becomes chipped, cracked or simply are missing, you will get grinding noises and bucking problems. Use a strong flashlight and check ALL of the rollers for damage.
Posted on Jan 21, 2009
Just had the same problem with my '05 van. I put the Master Switch in the off position. I pulled fuse #7 on the driver side sub panel, located just above the engine hood release. I then disconnected the neg. terminal on the battery. I manually opened the pass. side slider and closed it.
I reconnected the battery and replaced fuse #7. I put the master door switch in the on position. I activated the auto door switch, and it worked.
Posted on Feb 15, 2009
Please check the aft track roller assembly. It is easiest to inspect from the rear of the van looking forward when the door is open. You'll see the rear hinge assembly clearly. The track rollers cannot be seen but you can pull outboard on the rear edge of the door--the door should not move outboard more than 1/8 of an inch. If it moves out more than this or feels sloppy, suspect damaged/missing track rollers. This will cause the hinge to chatter in the track and "jolt". It will also cause the door to misalign during the close phase preventing the close motor from properly engaging.
Replacing this part is no easy task but doable if you are good with cars. Check back here for more details if you want to try it, otherwise get a competent mechanic or the Honda dealership to do it.
Posted on Jul 20, 2009
If it will not open or close using the remote and all other functions of the rmote work then it is likely to be the remote receiver inside the door behind the door liner. If it will not open or close using the handles the coupler may not be fastened that goes to the motor behind the right side liner. Or the motor may be bad. If you turn the doors off using the switch at the drivers left side and they still won't open or close check to see if the door is still on the rollers and not jammed up. The power motor may have gone bad or it may need to have the cable tension adjusted.
Posted on Aug 12, 2009
Tips for a great answer:
Mar 26, 2013 | 2009 Honda Odyssey
Jan 28, 2013 | 2006 Honda Odyssey Touring
May 31, 2012 | 2006 Honda Odyssey
Oct 24, 2011 | 2005 Honda Odyssey
Jan 19, 2011 | 2005 Honda Odyssey
Apr 17, 2010 | 2002 Honda Odyssey
Sep 19, 2009 | 2007 Honda Odyssey
Sep 07, 2009 | 2006 Honda Odyssey
251 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: