Question about 2004 Jeep Grand Cherokee
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just had the same with mine, pull the rubber boot back on the drivers side front door and look for a severed wire, mine was black...simply spliced the wires back together and problem solved!
Posted on Mar 23, 2009
This seems to be the affects of a bad dinamo charging your battery . If you take a appart the dinamo you should fine a part called in mechanic terms "the bones" they look like 2 black magnets with a wire coming out of them . They are not expencive and you should not change your dinamo untill you try this first a car dinamo is very expencive .
Posted on Jan 21, 2009
go throu licence plate pannel pull up on bar and on the inside under ur pannel the nut fell off the mechanism so just put on a new nut
Posted on Feb 03, 2009
SOURCE: Rear Axle Seal Replacement
remove rear tires, then remove brake calipers and rotors, then remove the 4 nuts (each side) that hold the axle shafts to the axle tube (located around the axle tube behind the backing plate) then using a slide hammer pull the axle shafts out, next using a die grinder and an air hammer get he retainer collar and the bearing off (without damaging the axle shaft) then remove the seal and the outer race which will still be in the housing. next put it all back together, make sure the plate with the studs is still on then slide the seal, bearing, then retainer on (all new parts) and using a press push them all the way back on. then is simple reassembly.
Posted on Apr 22, 2009
SOURCE: replace rear brake light
Open up the hatch and look for the screws that hold the tail light assembly to the body. After removing them you can gently pull the whole tail light from the truck. You will seee the sockets that the bulbs are in and they twist like a bottle cap to get to the bulb. Just pull the bulb from the socket and reverse what you did to put it back together.
Posted on Aug 09, 2009
Tips for a great answer:
Nov 25, 2013 | 2004 Jeep Grand Cherokee
Feb 18, 2011 | 2004 Jeep Grand Cherokee
Apr 04, 2010 | 2004 Jeep Grand Cherokee
Apr 03, 2010 | 2004 Jeep Grand Cherokee
Oct 01, 2009 | 2004 Jeep Grand Cherokee
May 31, 2009 | 2004 Jeep Grand Cherokee
May 04, 2009 | 2001 Jeep Grand Cherokee
Mar 21, 2009 | 2004 Jeep Grand Cherokee
Feb 26, 2009 | 2004 Jeep Grand Cherokee
Sep 14, 2008 | 2004 Jeep Grand Cherokee
46 people viewed this question
Usually answered in minutes!