97 Isuzu rodeo v6 motor won't start after disconnecting pcm before disconnecting the battery. Replaced pcm properly still won't start.
auto or stick shift transmission?
correlation is not always causation.!!!
example: if I open the glove box, and the engine stalls, It probably is not the glove box lamp doing that.
The 97 cars have very few learn modes.
in fact, none kill engines dead, ever.
the trouble with your post is it says nothing useful. sorry.
1: cranks robustly but will not start?
2: will not crank, or just clicks, or the starter motor is silent.?
the starter can also chatter, or free run, spin fast but engine not.
if it wont crank ,
jump start it, if it will not cranks still , crank in NEUTRAL.
PRNDL move lever to N per the steps in the operators guide.
3: cranks ok, there are 50 reasons for that.
if your car reads statistics, the spark plugs are bad, ignored.
do say this time what the engine did. exactly , you did not.
4: cranks ok , do so with wide open throttle to clear floods
this is secret mode in the op. guide that cuts off the fuel injectors.
V6, 3.1., 3.2 , 3.5Liter?
Jan 06, 2017 |
1997 Isuzu Rodeo