Question about 2007 Buick LaCrosse CXL Sedan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Where is the heater control
It sounds like the heater control valve may be stuck. This valve
allows heated water from the engine to pass through the heater core
which in turn heats the inside of your car. If this valve is stuck,
only a small portion of heated water will pass through. If this is the
case, you should have the control valve replace.
You should be able to find it by following the heater hoses coming from the radiator leading back to the firewall. These hoses will about 1/2 - 3/4 of an inch in diameter so you shouldn't get them confused with the normal radiator hoses.
You can probably purchase a new valve at an auto parts store but I'm sure the dealer will have one.
If that's not the problem, it could be that the core itself is clogged up. That's a little more expensive and more of a pain to replace. if this is helpful please dont forget to give rateing thank you
Posted on Dec 29, 2010
hi from uk most rear brake calipers have auto adjust mechanism and yours may be the same as on uk models whereas to compress the piston back into caliper to facilitate fitting new pads ? you have to both press and rotate piston and this sends piston back on the screw auto adjuster you will notice that piston has a couple of slots on its head ? this is there for enabling screw back having said this there is a rear caliper piston compress tool that does this job and the cheapest tool and good quality is made by draper tools and costs approx £10 in uk but can be obtained at any good auto stores and has instructions on use well worth the investment ? just one tip pistons normally screw back clockwise however! on fiats? the nearside screws anticlockwise so just observe that piston is going back when rotating c/wise if not you can fit a 3/8" drive extension and t bar to the rotator boss and using pressure ?turn piston a/clockwise hope this helps one word of advice !make sure you bleed brakes afterwards to clear out dirty fluid untill clean fluid shows this will improve brake pedal best wishes from uk
Posted on Mar 23, 2010
check the earth wire first,wattage on the bulbs in case their wrong or old type bulbs ,check supply voltage ,if all ok then fit aux spot lights .if still having a problem have eyes checked as over 40 the old peepers can deteriorate ,dont know the name of it but it can affect some people at a younger age than others,glasses will not correct this problem.
Posted on Feb 13, 2009
Tips for a great answer:
Dec 18, 2016 | Buick Cars & Trucks
May 23, 2016 | Buick Cars & Trucks
Nov 08, 2014 | 2006 Buick LaCrosse
Feb 11, 2014 | Buick LaCrosse Cars & Trucks
Feb 27, 2013 | 2005 Buick LaCrosse
Jan 04, 2013 | 2007 Buick LaCrosse CXL Sedan
Dec 31, 2012 | 2007 Buick LaCrosse CXL Sedan
Nov 13, 2011 | 2006 Buick LaCrosse
Dec 29, 2010 | 2005 Buick LaCrosse
677 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: