Question about 2005 Ford Escape

Open Question

Where is the barometric pressure sensor on 2005 ford escape

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 341 Answers

SOURCE: i have a code of p106 barometric pressure sensor

This is where a DUI guy can get into unnecessary expenses.There are causes of this code that are independent of the sensor. There has to be correct voltage going to the sensor. As well, the sensor also has to have a good path to ground. The sensor could be sending an accurate value to the computer.Low manifold vacuum can set this code too. If there is a vacuum hose running to the sensor it could be kinked,cracked or plugged with sludge or carbon.The sensor only sends what it senses and these will give false codes.

Posted on Dec 29, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the knock sensor located on a 2005 ford escape


hI generally they are attached to the engine block area and look like a oil pressure switch (a bit vague I know) but if you don't know what or where it is don't go near it and bring your vehicle to a proper repair shop !

Mar 09, 2015 | 2005 Ford Escape

1 Answer

Where is the Map Sensor on 2005 Ford Escape 4Cyl ? How do you replace it


M.A.P. Sensor Operation: Measures intake manifold vacuum pressure to help control the air and fuel mixture and timing. Contains a pressure-sensitive element that connects to an electronic circuit, generating a signal that changes with pressure changes in the manifold.,all you do is unplug ,old one and remove the screws or small bolts and replace and plug in new one ,be sure to clear computer before running. if this helped please let me know .
Woody

Sep 10, 2014 | 2005 Ford Escape

1 Answer

Reset low tire pressure light Ford Escape 2005


Read the owners manual

No manual,can't figure it out

Ask for an education at a tire store

Maybe you have a failed tire sensor

Sep 21, 2013 | 2005 Ford Escape

1 Answer

Engine light on po106 code


  • OBD II P0106

Fault Code Definition
The Manifold Absolute Pressure Sensor/Barometric Pressure Sensor measures the rise and fall of the air pressure inside the Intake Manifold. This provides critical data needed for the Powertrain Control Module (PCM) to control the Air Fuel Ratio, the Ignition Spark Timing, and many components of the Emissions Control Systems. The Manifold Absolute Pressure/Barometric Pressure Sensor P0106 code is set when there is a problematic or erratic performance in the voltage signal to the PCM.

Symptoms

  • Check Engine Light will illuminate
  • In many cases, no abnormal symptoms may be noticed
  • In some cases, the engine may be hard starting and/or get poor fuel economy
  • In some cases, noticeably poor engine performance may occur

Common Problems That Trigger the P0106 Code

  • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is defective
  • Intake Manifold vacuum leaks
  • Faulty or corroded Manifold Absolute Pressure Sensor/Barometric Pressure wiring or connections

Common Misdiagnoses

  • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is an Intake Manifold vacuum leak
  • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is a stuck-open EGR Valve
  • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real problem is a defective Idle Air Control Motor, which causes a very low engine idle

Sep 19, 2012 | 2004 Ford Freestar

2 Answers

I have a 2005 Ford Escape that gave a P0193 code, the car seems to not go when you put the pedal to the floor. Only has about 75000 miles


  • P0193 Fuel Rail Pressure Sensor Circuit High Input. This can be fixed by replacing the sensor. More than likely it has gone bad for some reason (it's hard to tell exactly what caused it).

  • Have a good one!

    Feb 21, 2011 | 2005 Ford Escape

    1 Answer

    What do these diagnostic codes(PO106,PO121) mean for a 2000 deawoo lanos.


    OBD II Fault Code
    • OBD II P0106
    Fault Code Definition
    The Manifold Absolute Pressure Sensor/Barometric Pressure Sensor measures the rise and fall of the air pressure inside the Intake Manifold. This provides critical data needed for the Power Train Control Module (PCM) to control the Air Fuel Ratio, the Ignition Spark Timing, and many components of the Emissions Control Systems. The Manifold Absolute Pressure/Barometric Pressure Sensor P0106 code is set when there is a problematic or erratic performance in the voltage signal to the PCM.
    Symptoms
    • Check Engine Light will illuminate
    • In many cases, no abnormal symptoms may be noticed
    • In some cases, the engine may be hard starting and/or get poor fuel economy
    • In some cases, noticeably poor engine performance may occur
    Common Problems That Trigger the P0106 Code
    • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is defective
    • Intake Manifold vacuum leaks
    • Faulty or corroded Manifold Absolute Pressure Sensor/Barometric Pressure wiring or connections
    Common Misdiagnoses
    • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is an Intake Manifold vacuum leak
    • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real cause is a stuck-open EGR Valve
    • Manifold Absolute Pressure Sensor/Barometric Pressure Sensor is replaced when the real problem is a defective Idle Air Control Motor, which causes a very low engine idle

    Oct 28, 2010 | 2000 Daewoo Lanos

    1 Answer

    Hi, i got the P2228 scan code, barometric pressure cicuit low. Somebody knows how can i fix it?


    General Description
    The barometric pressure (BARO) sensor is built into the engine control module (ECM)/powertrain control module (PCM), and
    it monitors atmospheric pressure. The ECM/PCM estimates appropriate intake airflow from the manifold absolute pressure
    (MAP) sensor output voltage and BARO sensor output voltage. If the BARO sensor output voltage is a specified value or
    less, the ECM/PCM detects a malfunction and a DTC is p2228 stored. -- it is most likely a problem with the mass airflow sensor. but a problem like this should been seen at a dealer

    Oct 25, 2009 | 2005 Honda Accord

    1 Answer

    I have a code of p106 barometric pressure sensor


    This is where a DUI guy can get into unnecessary expenses.There are causes of this code that are independent of the sensor. There has to be correct voltage going to the sensor. As well, the sensor also has to have a good path to ground. The sensor could be sending an accurate value to the computer.Low manifold vacuum can set this code too. If there is a vacuum hose running to the sensor it could be kinked,cracked or plugged with sludge or carbon.The sensor only sends what it senses and these will give false codes.

    Dec 28, 2008 | 2005 Ford Escape

    Not finding what you are looking for?
    2005 Ford Escape Logo

    Related Topics:

    94 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    fordexpert

    Level 3 Expert

    5546 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...