Question about 2005 Hyundai Sonata 2.4
IS LOCATED ON SWITCH WHERE YOU TURN ON HEADLAMPS GRAB THE END OF THAT SWITCK AND PULL OUTWARD.
Posted on Jan 03, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Look under the bumper and you will see two large phillips head screws right in front of the wheels. Take these two screws out and bend/move the plastice piece out of the way. Now you can easily get to the bulb. There is a cap that twists off that protects the wires and back of the bulb. Twist this off and then remove the plug portion from the back of the bulb. The bulb then turns 1/4 to 1/2 revolution to loosen and remove. Reverse steps for installation.
Posted on Dec 19, 2009
Yes there is a sensor located on the front of engine on the transmission side(single wire). It cannot be "reset". Possibly loose connection at the sensor,or a faulty sensor, OR... you could be losing oil pressure inside the engine somewhere(lets hope not) these engines are designed to run on very low oil pressure compared to cars of days gone by. The sonata 4 cylinder runs about only 12 psi. The V6 is 7.6 psi or more.
So if it is an oil pressure issue it is extremely important not to run the car before it is fixed or you will need an entire engine.
Posted on Jan 27, 2010
Tips for a great answer:
Apr 17, 2011 | 2005 Hyundai Sonata
Mar 29, 2011 | Hyundai Sonata Cars & Trucks
Jun 26, 2010 | 2005 Hyundai Sonata
Apr 27, 2010 | 2006 Hyundai Sonata
Apr 16, 2010 | 2005 Hyundai Sonata
Mar 12, 2010 | 2008 Hyundai Sonata
Jan 14, 2010 | 2005 Hyundai Sonata
Jul 25, 2009 | 2005 Hyundai Sonata
May 26, 2009 | Hyundai Sonata Cars & Trucks
258 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: