- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you must test all. However it more easy if you RUN the scanner/computer for easy diagnostic and fix it. You must look, for dirty, corrosion,oxide, loose wires or connector. Test the voltage in fuse, relais, sender.and the Fan for voltage with VOM . God bless you
No their isnt a seperate fuse i would suspect that you have a faulty bulb holder try testing it with a meter to see it works using a seperate earth wire back to the battery in case its a faulty earth connection
hi did you get the resistor fixed if not you need to remove the glove box by removing the screws that can be seen then there are two plastic lugs that need to be pulled out sideways to enable you to remove the glove box then you will see the resistor card on the side of the motor thats on the new shape micra k12
HI, WHAT YOU NEED TO DO IS JACK THE FRONT OF THE CAR UP GET A SET OF JUMP LEADS AND A BATTERY OR A NEIGHBOURS CAR AND CLAMP THE RED LEAD ON TO THE STARTER FEED CABLE, (THICK WIRE) THEN CLAMP THE BLACK LEAD TO EARTH, THIS SHOULD ENABLE YOU TO ACCESS THE CAR, HOPE THIS HELPS