Question about 2008 Ford Fusion

Open Question

How to remove front rotors and pads on 2008 ford fusion

Rotors need to be turned

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 958 Answers

SOURCE: need to replace the rear rotors on the ford f150 2005 4x4

yes they should come off unless they are stuck. this is where the problem arises. if the rotors are stuck. what you can do is slam the whole piece where the rotor is on a block of wood so that it won't be damaged. but the rotor would not be touching the wood. let the weight of the rotor force itself off it's holder.

as it comes off, you could notice the rust that have caused it to stuck.
clean it thoroughly before assembling back.

i hope i was able to help,

drcool

Posted on Aug 17, 2008

  • 1 Answer

SOURCE: 2008 Ford Fusion Wing Mirror Replacement

I checked Ford Focus mirror replacement and it seems to be the same. This is for the manual, unheated mirror.

Remove the mirror cover inside the door - slide a screwdriver behind the cover and pry loose carefully.

Remove the single 10mm bolt and the mirror comes free.
NB. Do not drop the bolt into the door.

Posted on May 22, 2009

dcraig1000
  • 16 Answers

SOURCE: REPLACING BRAKE PADS ON REAR

use a c clamp

Posted on Jul 07, 2009

  • 1779 Answers

SOURCE: 2008 ford fusion alerts on dashboard

You can download a free owners manual from this site, it will identify all the dashboard alerts:
https://www.fleet.ford.com/maintenance/owners_manuals/results.asp

Posted on Aug 13, 2009

  • 4834 Answers

SOURCE: how do i remove radio from 2008 ford fusion radio ...

http://www.fitaudio.com/index.php?CategoryID=13

Posted on May 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove and replace passenger side mirror on a 2014 ford fusion


Replace Your Car Passenger Side Mirror - How To - DIY ...

? 3:46
https://www.youtube.com/watch?v=77lBQ_CRqdo
Apr 10, 2012 - Uploaded by GregHint
See how even a novice can repair a passenger mirror on a FordEscape. ... Replace Your Car Passenger Side Mirror - How To - DIY .... Replace 2003-2008 Toyota Corolla Side Mirror, How to Change Install 2004 2005 2006
About 22,000 results (0.61 seconds) Search ResultsHow-To: Replace Ford Fusion side mirror (HD) - YouTube? 7:27https://www.youtube.com/watch?v=iGHeXUbvvJsMay 7, 2014 - Uploaded by Derrick HardingFord Fusion SEL 3.0 Liter V6 How to fix broken side mirrorIncludes: ... Published on May 7, 2014 ..... Great instructions - just replaced the driver's side mirror on my 2007 Fusion following your instructions. ... Front brake pad replacement 2006 - 2012 Ford Fusion Lincoln Mazda Pads Rotor Install Remove ...

Jan 08, 2016 | Ford Cars & Trucks

1 Answer

Front brake rotor replacement 2008 ford fusion


loosen the lug nuts, Jack it up , take the tire off , remove the caliper an caliper mounting bracket , pull off rotor !

Oct 24, 2015 | 2008 Ford Fusion

1 Answer

Need factory stereo and speaker wiring diagram for '08 Ford Fusion


2008 Ford Fusion Car Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Blue/Red
Car Radio Accessory Switched 12v+ Wire: Green
Car Radio Ground Wire: Black/Blue
Car Stereo Antenna Trigger Wire: Purple/Black
Left Front Speaker Positive Wire (+): White
Left Front Speaker Negative Wire (-): White/Brown
Right Front Speaker Positive Wire (+): White/Purple
Right Front Speaker Negative Wire (-): White/Orange
Left Rear Speaker Positive Wire (+): Brown/Green
Left Rear Speaker Negative Wire (-): Brown/Yellow
Right Rear Speaker Positive Wire (+): Brown/White
Right Rear Speaker Negative Wire (-): Brown/Blue

Feb 16, 2012 | 2006 Ford Fusion

1 Answer

I have a Ford Fusion 2008. In the last little whileWhen I brake I hear a heavy grinding sound. I don't hear it unless I turn the radio off and the heat down. It almost sounds like it's lagging. What would...


sounds like your brake pads are worn out depending ondamage to the brake rotors will depend on the cost. if you are lucky you will have to only replace the pads. if the discs are gouged out then you will have to either machine them flat again or buy new rotors also.

Jan 18, 2011 | 2008 Ford Fusion

1 Answer

What tools do i need to replace front pads and discs for a 2008 ford fusion v6?


Check this two proedures for...

How to Replace Brake Pads
Parts:
1. Brake Pad Set

Tools:
1. C-Clamp
2. Flat Head Screwdriver
3. Jack Stand Set
4. 3/8 in. Drive Ratchet
5. Combination Wrench Set
6. Tire Iron
7. Socket Set
8. 1/4 in. Drive Torque Wrench
9. Dial Indicator

Supplies:
1. Brake Cleaner
2. Brake Lubricant

Steps:
Step 1 Secure your vehicle on a level surface, making sure your car will not roll or lean too much when jacked up.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 Remove the cap from the brake master cylinder. Using a turkey baster, remove a quarter of the brake fluid from the master cylinder. Lift up the front of your vehicle using a floor jack.
o Tip: Using an aftermarket floor jack, instead of the original equipment (OE) jack, can make the job easier and safer. Verify the condition of the floor jack before use.

Step 3 Secure the vehicle with jack stands on both sides for safety before starting any work. The pinch welds and the frame are the two best locations. Do not rely on the jack to hold the vehicle up while working.
o Tip: Try to find a flat, level, and strong surface to put the jack stands.

Step 4 Remove the front wheels by removing the lugs nuts that are holding them on. To do this you will need to find the correct size socket and large ratchet or tire iron and turn them counter clockwise. If your vehicle is equipped with hub caps (plastic covers over the wheels), these will need to be removed to access the lug nuts.
o Tip: It is a good idea to try and break the lug nuts free before you jack the wheels off the ground. This way they you will not spin the front wheels or put stress on the transaxle.
o Tip: Lug nuts fasten the wheel to the hub and may be on very tight. To gain more leverage, use a breaker bar to loosen the nuts.

Step 5 Inspect the brake rotors for scoring, grooves, cracks and discoloration.

Step 6 Remove the brake caliper mounting bolts.

Step 7 Slide the brake caliper off of the brake rotor.
o Tip: If the brake rotors are worn and there is a big lip preventing the brake caliper from sliding off easily, gently pry one pad back into the brake caliper to clear the lip and make removal easier.

Step 8 Support the brake caliper up and away from the working area. Make sure you do not kink or pinch any brake lines. Do not disconnect the brake line.
o Tip: Use a bungee cord to secure the brake caliper out of the way and hang it on the suspension spring.

Step 9 Remove the brake pads from brake caliper.

Step 10 Compress caliper piston using a C-clamp.

Step 11 Install the new brake pads in the brake caliper.

Step 12 Reinstall the brake caliper.

Step 13 Torque the brake caliper mounting bolts to manufacturer’s specifications. Repeat for other side.

Step 14 Install wheels and torque to manufacturer’s specifications.

Step 15 Refill the brake fluid in the brake master cylinder and reinstall the cap.

Step 16 Road test vehicle, break in new pads.

o Tip: To break in pads and rotors refer to manufacturers recommendations. Some companies have different procedures for pad and rotor break in.


continue...

Jun 15, 2010 | 2008 Ford Fusion

2 Answers

How do i remove radio from 2008 ford fusion radio model cd6000


http://www.fitaudio.com/index.php?CategoryID=13

May 19, 2010 | 2004 Ford Fusion

1 Answer

How do I install rear brake pads on a 2008 ford fusion once calipers are removed?


unplug the brake fluid line from the caliper than squeeze the cylinders open then insert your new brakes into the clips then add more fluid and bleed the lines connecting them back to the brake caliper

Mar 10, 2010 | 2008 Ford Fusion

2 Answers

How do you press the brake caliper piston back on 2008


First, take a look at the piston, if it's flat or cup shaped, put an old pad at the piston and use channel locks to squeeze it back in, opening the tool wide to get it to catch the back of the caliper.
If....the piston has what looks like an "X" or cut outs, this is for a tool that spins the piston in with a special tool. (Subaru's and some other cars use this)
After you are all done and pump up the brakes, re-check the brake fluid level.

Dec 06, 2009 | 2008 Ford Fusion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...