Question about 1996 Subaru Legacy

Open Question

99 subaru legacy axle nut torque specs - 1996 Subaru Legacy

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Rebgagnon
  • 382 Answers

SOURCE: I need to know the

Factory specs are 122 to 151 lbs.

Posted on Jan 26, 2009

Rebgagnon
  • 382 Answers

SOURCE: Removing lg nut from axle on driver side of 1995 Subaru Legacy

It is much easier to loosen the nut when the tire is on it and the wheel is on the ground. You need to remove the center cap to access it. With out the wheel and brakes on it you would have to find some way to hold the axle still while breaking free the axle nut.

Posted on May 19, 2009

  • 509 Answers

SOURCE: torque specs 1995 subaru

Did you want the torque converter mounting bolt torque? If so, it is 17 to 19 foot pounds.

Posted on Jun 24, 2010

jturcotte
  • 7704 Answers

SOURCE: i have a 99 subaru

sure. 2.5 liter engine, right? Thanks for using FixYa!

Secure the head in place with the mounting bolts. Coat each bolts with clean engine oil, and hand-tighten. Tighten the cylinder head bolts to the following specifications:

  1. Step 1: all bolts to 22 ft. lbs. (29 Nm).
  2. Step 2: all bolts to 51 ft. lbs. (69 Nm).
  3. Step 3: loosen all bolts by 180 degrees, then loosen an additional 180 degrees.
  4. Step 4: bolts 1 and 2 to 25 ft. lbs. (24 Nm).
  5. Step 5: bolts 3, 4, 5 and 6 to 11 ft. lbs. (15 Nm).
  6. Step 6: all bolts plus 80-90 degrees.
  7. Step 7: All bolts plus 80-90 degrees.


jturcotte_593.gif

Posted on Dec 22, 2010

  • 509 Answers

SOURCE: What are the correct wheel

The wheel lug nuts should be torqued to 72 ft-lbs

Posted on Apr 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 99 accord ex is still making a squeaking noise when turning right sounds like metal hitting metal just replaced axle on that side passenger.


Have you inspected the brakes for wear? Possible backing plate rubbing on rotor. Possible wheel bearing on that side. Was the axle nut torqued to spec? This nut keeps proper pressure on the wheel bearing.

Sep 06, 2015 | Cars & Trucks

2 Answers

1990 Subaru Legacy C.V. Joint removing and replacing they both need changed and don't know how to remove


Apply parking brake place vehicle in park Jack vehicle up support with jack stands remove wheel then axle bolt bolt is a size 32mm socket then remove the two bolts connecting the shock tower to the hub and pull the hub down and slide the axle spline out of the hub then using a pry bar or large flat head screwdrivers pry the axle out of the transmission install new axle installation is the reverse of removal

Sep 20, 2011 | 1990 Subaru Legacy

1 Answer

99 subaru outback legacy. I got a bad knocking noise in the front, its coming from the area flywheel & torque converter, I don't know what its called, some say its third member or transfer case or...


If the noise is coming from the area you say it could be loose torque converter bolts or a cracked flexplate. If you do not have one, a stethascope is available at the auto parts stores and that will help pinpoint the area where it is coming from.

Sep 02, 2011 | Subaru Outback Cars & Trucks

1 Answer

I need the torque specs for a 99 GMC sierra k1500 wheel hub bolts (bearing), and axle nut bolts (front)


hub to steering knuckle 133 ft lbs.

axle nut 155 ft lbs.

lug nuts 140 ft lbs.

May 12, 2011 | 1998 Honda Civic

1 Answer

Torque specs 1995 subaru


Did you want the torque converter mounting bolt torque? If so, it is 17 to 19 foot pounds.

May 08, 2010 | 1995 Subaru Legacy

1 Answer

Removing lg nut from axle on driver side of 1995 Subaru Legacy


It is much easier to loosen the nut when the tire is on it and the wheel is on the ground. You need to remove the center cap to access it. With out the wheel and brakes on it you would have to find some way to hold the axle still while breaking free the axle nut.

May 18, 2009 | 1995 Subaru Legacy

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Replacing the front axle on a 93 subaru legacy


When I replace the axle halves, I run the Nut off till it is level with the shaft end. THen take a piece of wood and set it across the shaft and hit the wood with a hammer. Usually only takes one or two hits and pops right out.Then I remove the nut and finish removal . Hope this helps, Good luck and have a great day.

Mar 02, 2009 | 1993 Subaru Legacy

Not finding what you are looking for?
1996 Subaru Legacy Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...