Question about 1997 Honda Accord

Open Question

What is the code p1118 on 97 honda accord mean?

Whats the code p1118?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 408 Answers

SOURCE: honda accord 2.2ies

It means there is an issue with the airbag.  Disconnect the battery for 10 minutes and reconnect.  If this does not solve the problem, then you need to code the computer.  If you don't have a code reader, take it in and have it done.  It will tell you what the exact problem is with teh airbag.  There are many things that could cause it, as the SRS system is pretty complex.  Could be a bad sensor to a bad airbag ignition system.  

Posted on Mar 10, 2009

  • 1 Answer

SOURCE: honda accord 2002

hold down the 1 and 6 button on your radio and turn the radio on. a sequence of numbers and letters will flash. this is your radios serial number. removing the radio is not neccesary. once you have the serial number you can enter the vin number and your personal information into under stereo and gps service and it will give you the code. if you bought your car used just call a honda dealer and give someone in the service dept your radios serial number and they will give you the code. once you have the code turn your radio on and enter the code. poof. radio is fixed

Posted on May 05, 2009

  • 122 Answers

SOURCE: 1998 honda accord. obdII code 1167. what does this

this means you have an O2 sensor, heater circuit malfunction bank no. 2 sensor no.3 this should be the one on your exhaust system, under the vehicle around the catalytic converter. to test the heater circuit, you can use an ohm meter, unplug the connector and it should look like a/b top 2, c/d bottom two, check c/d with your ohm meter it should read 10 to 40 ohms, if it checks out ok, possibly the voltage is not reaching the sensor, check the connector to the sensor (yellow/black+) (green blue-) there should be voltage with the battery turned on, if there is not check th e main relay. Good luck, I hope this takes car of it.

Posted on Oct 02, 2009

Testimonial: "Thank you very much!"

  • 133 Answers

SOURCE: honda accord 2007 service code A23 what does this

Code 23 is the knock sensor,but this does not mean the sensor is faulty,could be picking up a knocking in your engine.Check oil level and oil pressure.Check wiring to the ecu from the sensor.

Posted on Mar 03, 2010

  • 202 Answers

SOURCE: i have a 01 honda accord 2.3l it has a obd fault

code p1456 : EVAP Control System Leakage ( fuel tank system).

try check the fuel fill cap. It must be a gray or black OEM cap and be tightened at least 3" clicks" to properly seal the system.

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does diagnostic code p0341 mean on a 2004 honda accord

Code 341 means there is a problem with the cam sensor signal being out of range. It could be the sensor, the wiring, or the timing chain.

Sep 05, 2014 | 2004 Honda Accord

1 Answer

What is code p1259 mean on a Honda accord vtech

This means the vtech system had a comprehensive failure. The Code does not say more than that on my sources. Someone else may have a diffeent data base.

Aug 11, 2012 | 2000 Honda Accord

1 Answer

What does p1295 mean for honda accord

is a honda code and i dont remember what it was .

Aug 03, 2012 | Honda Accord Cars & Trucks

1 Answer

My radio on my honda accord keeps showing code e, what does that mean?

Means that it is requesting the code (anti theft) to reactivate the radio. In all probability, the vehicle battery was disconnected and the anti theft tripped.

Jul 03, 2010 | 1999 Honda Accord

1 Answer

I have a 95 honda accord check engine light flash 1 long and 7 short. what does that code mean?

That means Code 17, one long flash means 1, seven short flashes means 7. The code is for the Vehicle Speed Sensor (VSS) Have it checked and replaced if necessary.

Jun 13, 2010 | 1995 Honda Accord

1 Answer

Honda accord 2007 service code A23 what does this mean?

Code 23 is the knock sensor,but this does not mean the sensor is faulty,could be picking up a knocking in your engine.Check oil level and oil pressure.Check wiring to the ecu from the sensor.

Mar 03, 2010 | 2007 Honda Accord Sedan

1 Answer

My 1998 Honda Accord trouble code is 5 and the

5 MAP Sensor (Manifold Absolute Pressure) mechanical problem / disconnected piping. I'm not completely sure of this one but most auto parts stores will give you the code meaning for free. Autozone is one who does this all the time. Sorry this is all I can tell you.

Dec 29, 2009 | 1998 Honda Accord

1 Answer

My 2007 Honda Accord has a problem

How did you get the code? It doesn't show up on the check engine light list

Feb 01, 2009 | 2007 Honda Accord Sedan

3 Answers

Engine lite on

700= Transmission Control System
740= Torque converter clutch circuit

Oct 23, 2008 | 1999 Honda Accord

Not finding what you are looking for?
1997 Honda Accord Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides