Question about 2004 Toyota Corolla

Open Question

2004 Toyota Corolla, both low beams don't work, high beams and all other lights work fine

Both low beams are out when I turn the light switch on. Both high beams, parking lights and tail lights work fine. Headlight relay or switch assembly? Thanks!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: Low beam headlights don't work

I have e-mailed you 2 .pdf files, one is the complete headlamp diagram, and the other is the relay locations. Please advise if you need further assistance.

Toyota Ed

Posted on Jan 02, 2009

Ad
mx5turbo92
  • 545 Answers

SOURCE: 1993 toyota corolla head & tail lights

did you check the bulb,relay or fuse for low beam

Posted on Jun 04, 2009

ourhowse
  • 2007 Answers

SOURCE: 2001 Toyota Corolla high beam lights are not

Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.

Posted on Jul 23, 2009

  • 507 Answers

SOURCE: 2006 Toyota Camry....headlights will not come on;

there was a recall on the headlight switch up to 06 camrys,find out if your car is affected by calling Toyota with the chassis no,and month of build

Posted on Nov 01, 2009

  • 180 Answers

SOURCE: My headlight low-beams don't work, yet the

I had a similar issue with a 92 Saturn SL1, were the problem wasn't anything easy. It ended up being that the wiring was so old and worn out (Somehow) that I ended up just buying the replacement light sockets with the wire leads and rebuilt the headlights to run off from toggle switches mounted on the dashboard.

Posted on Oct 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low beams don't work


Are you getting power in and out of the dimmer switch for both high and low circuits ?

Jan 23, 2013 | 1998 Isuzu Rodeo

1 Answer

My high beam lights work but my lo beam lights don't,can you help me


When you switch from High to Low beams, do the lights go out, or continue, in the "High" beam position??? If they go go, the transfer switch, that changes the high/low beam mode is working. The most likely problem, is that the Low Beam filaments are both burned out. Some, on original equipment, never changed, can burn out within days/weeks of each other. Could be that.

Sep 01, 2011 | 2004 Kia Sorento

2 Answers

Hello, I have a headlight problem on a 2004 chey calvalier. All of my lights work except low beam on drivers side. Fuses on left and right headlights are good. I've switched bulbs as well and nothing...


I would focus on the connections going to that head light for the low beam. I agree, it is not the switch, otherwise other side low beam would not be working. It is most likely bad bulb inlet( if it i separated bulbs for high and low) or it is the connection going to the low beam that operates it. Hope this helps. Don't waste your time on switch, it is not that.

Jun 08, 2011 | 2004 Chevrolet Cavalier

3 Answers

To whom it may Concern: My 2002 Toyota Corolla real brake lights and front high beam head lights have stopped working while all the light bulbs are still good. In fact they have not power going to...


In the passenger compartment: The Fuse no.# 18 (15A) = rear brake lights

tdisline_620.jpg

If the fuse no.# 18 - F18 (15A) is good, check and replace if necessary the brake pedal switch!

Jun 03, 2011 | 2002 Toyota Corolla

1 Answer

Both low beam lights dont work on my 2005 Toyota Corolla.; but my high beam lights do. I have already checked the fuses. Fuses okay. Is this a switch problem or should I check the bulbs first.


CHECK THE BULBS FIRST! TRY REPLACING WITH A NEA ONE ON ONE SIDE, AND TURN LIGHTS ON, IF YOUR LOW BEAM LITES UP, REPLACE THE OTHER ONE! IF NOT THERE COULD BE A WIRING PROBLEM TO THE LOW BEAMS

Feb 28, 2011 | 2005 Toyota Corolla

1 Answer

2001 Toyota Corolla high beam lights are not


Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.

Jul 23, 2009 | 2001 Toyota Corolla

1 Answer

1993 toyota corolla head & tail lights


did you check the bulb,relay or fuse for low beam

Jun 04, 2009 | 1996 Toyota Corolla

2 Answers

Low beam headlights don't work


I have e-mailed you 2 .pdf files, one is the complete headlamp diagram, and the other is the relay locations. Please advise if you need further assistance.

Toyota Ed

Dec 31, 2008 | 2005 Toyota Corolla

Not finding what you are looking for?
2004 Toyota Corolla Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...