Question about 1997 Cadillac DeVille

1 Answer

1997 cadillac deville broken pulley bolt

Broken idier pully bolt,is that part of the block or timing
cover assembly

Posted by on

  • Anonymous Mar 27, 2014

    tensioner pulley bolt size



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 101 Answers

This would be located on the block

Posted on Jan 22, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1997 cadillac deville and i need to know how the water pump drive pulley on camshaft is supposed to be removed? is there a special tool i need?

The water pump pulley usually has 4 small bolts and they are not torqued down too much. Normally, you can loosen the bolts before you loosen the belt that runs the pulley.

Mar 03, 2017 | Cadillac Cars & Trucks

1 Answer

Need a diagram showing exactly where the water pump is located on a 97 cadillac deville northstar


Fig. Water pump assembly-4.6L Northstar engine (click image for zoom)


Fig. Remove the water pump belt shield


Fig. Remove the water pump adjuster pulley retaining bolt and


Fig. Remove the water pump retaining bolts

Hope helps.

Jul 16, 2011 | 1997 Cadillac DeVille

1 Answer

How do i put fanbelt back on a 1988 cadillac Deville I can get belt over the hump

there is a tension pully that you need tocompress in order for your belt to go ovetr the pulley there are no adjustment bolts for the belt it is done all by the tension pulley it is the pulley that has a 1/2square so that you can put a 1/2 ratchet or breaker bar on and decompress with this will solve all your belt problem

Mar 04, 2011 | 1988 Cadillac Sedan DeVille

1 Answer

The left backup lamp on my 95 cadillac deville is broken. Not the bulbs, they appear to be fine. The part that is broken is the glass or plastic part that covers the bulbs. I could use some step by step...

On the older models Devilles there should be torx bit screws one on the top and one on the bottom .Once you remove the screws gently wiggle the bezel loose and remove.Now remove the lamp assembly and remove socket assemblies.If there not screwed from the outside there bolted from the inside off the trunk.If there in the trunk move the corner covering in the trunk corners.There you will see the bolts that hold the lamp assembly in place remove the bolts and the lamp assembly will come out.

Feb 12, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

How do I fix a broken pully on a water pump?

Remove the belt then remove the 4 water pump pulley bolts.
reverse this procedure to install

Sep 15, 2010 | 1995 Cadillac DeVille

1 Answer

How to remove the water pump pully on the 4.6 northstar engine on a 1997 cadillac deville

you don't, the water pump has pulley built in. (it's located on the driver's side in the rear of the engine in case you mis-understand that it's on the front of the engine )
there's a special tool to remove and install the water pump.
if you have the tool the the job is very easy

Mar 07, 2010 | 1997 Cadillac DeVille

2 Answers

I need to replace the cam pulley that drives the water pump belt on a 1997 deville is this pully pressed on do I use a pulley puller to remove it?

if there is a dimple in the middle of the shaft, then you will probably need a pulley remover. make sure you havent missed any bolts that you have to go through little holes on the pulley to get to also. and also turn the pulley and look for any bolts that hold it on that are on the sides of the pulley, like a allen key bolt but on the side of the pulley that holds it on that way. i hope this helps

Jan 15, 2010 | 1994 Cadillac DeVille

1 Answer

1997 cadillac deville powersteering pump repair

there should be three 8mm bolts holing on the pump you will have to go through the pulley to access them

Sep 21, 2008 | 1991 Cadillac DeVille

Not finding what you are looking for?
1997 Cadillac DeVille Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts


Level 3 Expert

78238 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides