Question about Mitsubishi Cars & Trucks

Open Question

Build up of carbon causing loss of power

Mitsubishi canter

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 328 Answers

SOURCE: mitsubishi canter truck

egr stands for Exhaust Gas Recirculation.....it is a system that takes some of the exhaust gasses and recirculates it back into the intake to be re burnt, although this system is necessary for proper emission readings at your tail pipe.it will likely cause no problems with the driving of your vehicle.........the problem could be a faulty egr valve or it could be a problem in the plumbing (pipes and hoses) of the system.Your best bet is to take your vehicle to a trusted mechanics shop to have them inspect the egr system and replace the faulty parts.
hope this helps.............Good luck!

Posted on Dec 13, 2008

Ad
basoco196456
  • 5 Answers

SOURCE: Hi I have a lack of power on my 4m40 1994 Mitsubishi canter when I am driving then the vehicle cut out what can't cause it? I change fuel filter and still getting problem.

Try replacing the catalytic converter that will cause to much backpressure pull oxygen sencer see if power returns. .

Posted on Jul 20, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2012 Mitsubishi canter truck has a red light that says loss power. Can you tell me what it means


It means the computer has detected a fault and has cut power to non-essential accessories. There will be a trouble code stored in the computer telling the tech what's going on. Without that code, not much you can do.

Aug 25, 2017 | Mitsubishi Cars & Trucks

Tip

Loss in engine power, sluggish responses, low top speed, etc.


If your car has
  1. Poor fuel responses
  2. Lost its "power"
  3. Low RPM
  4. Lower top speed
  5. Burns a lot of fuel
Then it could be because of carbon build-ups in your engine's combustion chamber. This is left behind with unburned fuel. It causes poor acceleration, a loss in power, lower top speed, and burns more fuel than it really has too. Not to mention causes smoke belching.

The best way to get rid of that would be to have a carbon ridding solution injected into the combustion chamber. The solution will liquify the carbon and other build-ups, which would then restore the "power" of your car. You'll get better acceleration, higher rpm and top speed, save fuel, etc. have a mechanic do it for you. It's alot cheaper and faster than having the engine overhauled (overhaul could trigger "loose compression").

on Aug 08, 2008 | 1995 Toyota Camry

Tip

Restoring Car's Power And Saving Fuel At The Same Time


If your car has
  1. Poor fuel responses
  2. Lost its "power"
  3. Low RPM
  4. Lower top speed
  5. Burns a lot of fuel
Then it could be because of carbon build-ups in your engine's combustion chamber. This is left behind with unburned fuel. It causes poor acceleration, a loss in power, lower top speed, and burns more fuel than it really has too. Not to mention causes smoke belching.

The best way to get rid of that would be to have a carbon ridding solution injected into the combustion chamber. The solution will liquify the carbon and other build-ups, which would then restore the "power" of your car. You'll get better acceleration, higher rpm and top speed, save fuel, etc. have a mechanic do it for you. It's alot cheaper and faster than having the engine overhauled (overhaul could trigger "loose compression").

on Aug 08, 2008 | 2001 Honda Civic

1 Answer

Trying to time a 1988 Mistubishi mini truck.


[PDF]Mitsubishi Canter Truck Engine Diagram - SourceForge

inhub.sourceforge.net/alpha/.../mitsubishi-canter-truck-engine-diagram.p...
mitsubishi canter truck engine diagram mitsubishi canter 4d34 engine manual ...light on dash symbols 95 mitsubishi mini truck repair manual 1988 mitsubishi ...

Timing problem 22r 1987 ' IH8MUD Forum

forum.ih8mud.com > ... > 95-older Toyota Truck Tech
Mar 17, 2009 - I am having trouble timing my 22r, 1987 mini truck. ... adjusting the valves, at TDC, the dot on the timing chain cam gear is not quite all the way ...

Mitsubishi 2.6 liter engine - description and common repairs

www.allpar.com/fix/26.html
I had a 1988 2.6 liter Mitsubishi engine in my Mazda B2600 pickup truck, and ... and I would have been out the $99 for a new timing chain kit (which includes ...

Jan 08, 2016 | Mini Cars & Trucks

2 Answers

The car lost power what is the cause.


It could b the injectors need cleaning or u may have carbon build up

Mar 07, 2015 | Cars & Trucks

1 Answer

I have a problem engine idles good but when I press on the gas it back fires and wants to quit running


a couple of problem areas to check first is fuel -most likely problem is fuel filter clogging -other problem s to look at are air filter -egr valve clogging ,builds up with carbon robs power remove and clean off carbon and fuel pump can be causing loss thru pressure [leak ]or pump losing pressure [going bad]

Oct 23, 2011 | 1998 Chevrolet S-10 Pickup

1 Answer

My truck is throwing p0110 p0300 and p0401 can I clean or rebuild these items in my own garage?


most likely problem is to check ur egr valve, possible carbon build up or faulty unit will cause the misfire also will cause loss of power ,pinging if u remove egr possible to clean the carbon off if lucky if damaged beyond repair replace good luck

Nov 24, 2009 | 2002 Toyota Tacoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...