Question about 2008 Suzuki Forenza
I purchased a repair manual online (pdf) but it did not include info for the 2.0 engine. I need the torque specifications for the camshaft. Can you point me in the right direction. Thanks
Most likely the torque specs are the same as the other model engine that is in your manual just be sure to tighten them slowly and equally back in forth in small increments because those cam shafts can snap very easily
Posted on Apr 17, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The Best place to get a Repair Book for your Model is....Chilton.com or Haynes.com Or your Local Library Carries a Lot of these Books. Please Rate My Response! Thanks!
Posted on Feb 07, 2009
Tips for a great answer:
Dec 30, 2016 | Honda Cars & Trucks
Mar 29, 2016 | 2004 Ford F150
Dec 27, 2015 | 2007 Suzuki Forenza
Dec 21, 2015 | 1998 Ford Windstar
Nov 22, 2014 | 1996 Toyota Land Cruiser
Oct 11, 2014 | 2005 Suzuki Reno
Sep 14, 2014 | 2005 Suzuki Forenza
Since you didn't say which engine you have, I've pulled torque specs for 3 different engines. Also, since I can't include a diagram showing the relative locations of the numbered head-bolt locations, it would be a good idea for you to purchase a vehicle specific repair guide that will show this info.
Take particular note about the TTY (Torque to Yield) bolts used on 2 of the 3 engines shown. It is said that new head bolts MUST BE USED when head is replaced or re-installed to obtain the proper torque.
B2500 4 Cylinder
Torque sequence: --------- ' 10 6 2 4 8
' front ' ' ' 7 3 1 5 9 ' -----------Step 1: torque in sequence to 51
Ft/Lbs Step 2: torque again in sequence to 51 Ft/Lbs Step 3: final
tighten all bolts an additional 90 to 100 degrees recheck final
torque in sequence *** CAUTION ***engine uses Torque To Yield head
bolts (TTY) that permanently stretch during the initial installation.
New head bolts must be used when cylinder head is replaced or
re-installed to obtain proper torque.
B3000 3.0 6 Cylinder
Torque sequence ---------- ' 6 4 2 8 '
' ' ' 5 1 3 7 ' ---------- Step 1: torque to 59 Ft/Lbs Step 2: loosen
in sequence (1) full turn Step 3: torque to 41 Ft/Lbs Step 4: torque
to 73 Ft/Lbs
B4000 4.0 6 Cylinder
Torque sequence --------- ' 5 1 3 7 ' '
' ' 6 4 2 8 ' --------- Step 1: torque cylinder head bolts in
sequence to 26 Ft/Lbs Step 2: torque cylinder head bolts to 56 Ft/Lbs
Step 3: turn cylinder head bolts in sequence an additional 90-degrees
recheck final torque in sequence *** CAUTION ***engine uses Torque To
Yield head bolts (TTY) that permanently stretch during the initial
installation. New head bolts must be used when cylinder head is
replaced or re-installed to obtain proper torque.
Good luck with this job!
Feb 06, 2011 | 1998 Mazda Pickup
Feb 06, 2011 | Toyota 4Runner Cars & Trucks
Sep 02, 2010 | Dodge Stratus Cars & Trucks
402 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: