Question about 2005 Chevrolet Impala
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: torque specs.
connecting rod = first pass 18 ft lbs , second pass 75 degrees
main bearings = first pass 37 ft lbs , second pass 77 degrees
wow that wasn't easy to find for some reason .
Posted on Jan 01, 2009
Those values and most everything else you need for DIY work are contained in the Haynes manual for your vehicle.
We have one with each of our vehicles and not only give you the info needed to do repairs yourself but also get an idea of how much work a specific repair should (or shouldn't) cost.
'88 Chevy pickup manual
You can also buy these from auto parts stores for a few dollars less and sometimes on eBay for even less.
Posted on Feb 20, 2010
MAIN BEARINGS BOLTS TORQUE 75 FT LBS ROD BEARINGS TORQUE 20 FT LBS + 70 DEGREES. CRANKSHAFT PULLEY DAMPER BOLT 70 FT LBS
Posted on Nov 01, 2010
SOURCE: i need torque specs for
The torque speic for the main bearing caps on a 2.2 are 105 nm or 77 ftlbs all. But you know if your doing the crank there is a lot more to it then the torque . The main bearing clearance is 0.0006 to 0.0019 and the rod clearance is even tighter 0.00098 to 0.0031. Well good luck
Posted on Feb 24, 2011
Tips for a great answer:
Oct 11, 2014 | 2000 Chevrolet Impala
Mar 14, 2013 | Chevrolet S 10 Cars & Trucks
Dec 03, 2011 | 2000 Pontiac Bonneville
Aug 26, 2011 | 2000 Chevrolet S-10
Jan 15, 2011 | 2000 Ford Taurus
Nov 01, 2010 | 1993 Chevrolet S-10
Feb 20, 2010 | 1988 Chevrolet C1500
May 07, 2009 | 1977 Chevrolet Silverado 2500
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: