Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here are the radio wire colors of the whole system, please rate this solution.
2007 Pontiac G6 Car Radio Stereo Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Red/White
Car Radio Accessory Switched 12v+ Wire: The radio harness does not provide a switched power source. Run a wire to the fusebox for switched power or use the brown wire (+) at the ignition wire harness.
Car Radio Ground Wire: Black/White
Car Radio Illumination Wire: Pink
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue
Posted on Jan 06, 2009
Hi, had total issues with this too! Your back speakers arent going because they are amped by the factory amp in the boot. You have to provide power to the amp so that it will turn the rear speakers on. This was a white and black striped wire in my car (Audi A3 1997) The rear speakers are blue /green and brown/red (left rear) , and the LH rear is brown/red and (forgotten colour) but the wire on the bottom left under those two brown/red wires on the 20pin harness. If you wire it all up like this then your rears should be going :)
Posted on Apr 28, 2009
Testimonial: "So sorry for the very long delay in replying to your advice. It was the sub/amp in the boot as you correctly guessed. Another £200! Many thanks Pal"
SOURCE: peugeot 206 radiator fan relays
my fiancee's did this aswell, you need to get a new relay form peugeot (arounn £10) and 5 male conectors that will fit on the relay and cut the block off the wires and attach it this way. thats how i did it and it works a treat now mate.
hope that help mate, Ray.
Posted on Jul 05, 2009
Tips for a great answer:
Apr 18, 2015 | Peugeot 206 Cars & Trucks
Jul 11, 2014 | 2003 Peugeot 206
Feb 23, 2012 | 2005 Peugeot 206 1.4
May 02, 2010 | 2005 Peugeot 405
May 01, 2010 | 1989 Peugeot 405
May 23, 2009 | 1983 Peugeot 504
Apr 06, 2009 | 2006 Peugeot 405
86 people viewed this question
Usually answered in minutes!