Question about 1999 Buick Park Avenue

1 Answer

Where is the Power steering reservoir for a 99' Buick Park Ave.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You will need a flashlight; it will be very helpful. Standing on the passenger side of the vehicle, shine the flashlight down behind the engine approximately in the corner behind the pulleys but a little more closer to the firewall and look straight down. The power steering reservoir sits like one to two feet below where you probably expect to see it; they seem to have hidden it very well . I have a 98 and a 99 Park Ave and it took me forever to find it.

Posted on Feb 13, 2013

  • D_Allen Feb 13, 2013

    You will need a flashlight; it will be very helpful. Standing on the passenger side of the vehicle, shine the flashlight down behind the engine approximately in the corner behind the pulleys but a little more closer to the firewall and look straight down. The power steering reservoir sits like one to two feet below where you probably expect to see it; they seem to have hidden it very well . I have a 98 and a 99 Park Ave and it took me forever to find it.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
stevehinrich
  • 61 Answers

SOURCE: Location of power steering reservoir

This pump sits down below tha alternator. If it does not have a remote resevoir than the resevoir sits on top of the pump. It is a pain to get to.

Posted on Feb 28, 2009

  • 1596 Answers

SOURCE: power door lock switch replacement




Remove or Disconnect

Door handle trim plate.

  1. .Install or Connect

  2. Electrical connector and door lock cable.
  3. Trim panel by engaging hooks on backside of panel.
  4. Push pin fastener in defroster duct.
  5. Screw from behind lamp assembly.
  6. Courtesy lamp assembly.
  7. Two screws in arm rest.
  8. Arm rest cover plate.
  9. Door handle trim plate.
There May Be A Need to Drill Out RIVETS that Hold Motor in place,. Just Replace with>>MACHINED SCREWS & BOLT'S




Remove or Disconnect

  1. Trim panel. See: Doors, Hood and Trunk\Doors
  2. Four tabs retaining switch.
  3. Electrical connector.
Install or Connect

  1. Electrical connector.
  2. Snap switch into trim panel.
  3. Trim panel.

Posted on Mar 14, 2009

carlsbiz
  • 1124 Answers

SOURCE: replace 2000 buick park ave serpentine belt

Firt - study & write down (draw) the belt path,,
and be sure about it..

Then - put a wrench on the nut in the center of the tension pully.. Move the tension pully to loosen the belt.. Pull belt off..

Repeat to put new one on..

Should be pretty easy..

Posted on Jul 09, 2009

honeymokey
  • 3113 Answers

SOURCE: 1991 buick park ave. security system set off,

Did you try the drivers door lock cylinder?

Posted on Jul 20, 2009

wracefans24
  • 1985 Answers

SOURCE: 98 buick park ave, hard to start, run's rough. po172 code

oxygen sensor in exhaust

Posted on Dec 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to add freon to a a 99 park ave


If you have to add, you have a leak to repair first

Leave A/C work up to a shop with the proper knowledge
& test equipment/do not polute the atmosphere

May 21, 2014 | 1999 Buick Park Avenue

1 Answer

Bought 2000 buick park ave. ultra & do not know how to adj drivers seat up or down.


should have buttons on your armrest or down on the side of the seat by the drivers door if not check in front of the seat

Nov 24, 2013 | 1993 Buick Park Avenue

2 Answers

How do i install a power streering pully on a 95 buick park ave


You'll need to buy or rent a pulley tool kit from an auto parts store.

Jul 23, 2012 | 1996 Buick Park Avenue

1 Answer

Transmission Range Sensor 1994 PARK AVE


Never thought about a Dealers Parts Counter?

How about the Auto Parts Store,On Line Parts Places,
Rock Auto.Com & 100's of others,Transmission Parts
Wholesalers

I can go on all night, if you like

Salvage Yard,Trans Shop

Jun 08, 2012 | 1994 Buick Park Avenue

1 Answer

Where is power steering fluid checked & put in?


There is a special reservoir for the power steering fluid, it will be marked or may be part of the power steering pump. The reservoir will have a max mark on it or may have a dip stick attached to the cap.

Feb 02, 2011 | 1995 Buick Park Avenue

1 Answer

I cant locate where to put power steering fluid in my 1998 park ave ultra


The power steering pump cap is on the passanger side of the engine and between the engine and back fire wall. It is a very tight fit to get the cap off and back on.

Apr 15, 2010 | 1998 Buick Park Avenue

Not finding what you are looking for?
1999 Buick Park Avenue Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...