Question about 2002 Chrysler Concorde

Open Question

I have concorde 2002 whit 3,5 the transmission have a problem the code is p0700 p0741 and p0841

Lxi whit 3,5 l

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75066 Answers

SOURCE: engine light on code p0732, p1782, p1787 and p0700 twice

P0732 Gear 2 Incorrect ratio
P1782 P/ES Circuit Out Of Self Test Range
P1787 2-1 Downshift Error
P0700 Transmission Control System (MIL Request) Malfunction

Here is the deal, u have some serious transmission related faults, in order to sort this out u will need to take this to the dealer, allot of testing is required to get to the bottom of this, if I had to guess I would say the trans is going to have to be overhauled.

Posted on Mar 19, 2009

  • 323 Answers

SOURCE: Chrysler Concorde LXI 4 door - 2004 The car starts up and seconds after, the RPM drops and the car shuts off. The code P0513 comes up on the computer.

That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.

Posted on May 07, 2009

  • 160 Answers

SOURCE: 2002 Chrysler Concorde Lxi

There is a faulty sensor or valve. Sounds like a valve. The best thing to do, is take it somewhere that can diagnose the trouble code. Autozone can I believe, and they can tell you exactly what's going on with it.

Posted on Jul 17, 2009

  • 184 Answers

SOURCE: engine code reads P1776 1/2 and P0700 transmission

P0700-This Relates to MIL"Malfunction Indicator Lamp")( Request - Control System for Transmission
unable to locate description for P1776,can you get all systems scanned for codes again as 0700 just indicates that a fault has occurred that has lit the check light and logged at the ECU.
Obviously it will be related to the shift fault,maybe a speed sensor or a dirty fluid fault.
Get back to me with any extra info.

Posted on Apr 10, 2011

early93
  • 177 Answers

SOURCE: I 'm getting codes P0841

I found 4 of the codes. Two of em say you have a pressure sensor error, one says shift solenoid A, and one says gear 1 incorrect ratio. We can ignore the gear ratio one. I bet the issue is either an oil leak, bad shift solenoid, or both.

Posted on Jun 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I get code p0700 on 2004 dodge ram 1500 4.7 lt.


transmission system malfunction can be a few things the following links give some examples of different problems associated with p0700 code but more than likely if their is a noticeable problem than may have to have it diagnosed by a transmission shop
P0700 Transmission Control System Malfunction P0700 Dogge Ram Yahoo Video Search Results 2005 Dodge Ram 1500 transmission codes p0700 p0841 Transmission Automatic...

Aug 05, 2016 | 2004 Dodge Ram 1500

1 Answer

I have a 2002 chrysler sebring shooting codes po700 po455 po442 po700 po841 po846 po732 gear2 inc ratio po731 inc ratio po733 pulled out solenoid and had a metal shaving on the magnetic end helpplease


P0700 Transmission Control System Malfunction P0445 Evaporative Emission Control System Purge Control Valve Circuit Shorted P0442 Evaporative Emission Control System leak Detected (small leak) P0841 Transmission Fluid Pressure Sensor/Switch A Circuit Range/Performance P0846 Transmission Fluid Pressure Sensor/Switch B Circuit Range/Performance P0732 Gear 2 Incorrect Ratio
Full list of the OBD2 DTC from P0700 to P0999

May 04, 2016 | Chrysler Cars & Trucks

1 Answer

Transmission down shifting to 2 code po 700 or but it does not shift to 3rd gear anymore was resetting it 1st time lasted a month then every 2 or 3 weeks now i can"t reset it anymore no codes


P0700 Transmission Control System Malfunction OBD-II Trouble Code Technical Description Article by Dale Toalston ASE Certified Technician Transmission Control System TCS Malfunction What does that mean? Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory. This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module. Symptoms Symptoms of a P0700 DTC may include: Malfunction Indicator Lamp (MIL) illumination The transmission may exhibit drivability problems like slipping, etc. Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely). Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission. If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself. Register now to ask a question (free) Related P0700 DTC Discussions pt cruiser P0605, P0700, and P1391 What does P0605, P0700, and P1391 mean....I just put in a new catalyst on my car for smog but light engine turned back on...and I can't seem to know what is wrong ...please help me out here... 2002 Dodge Intrepid P0700 & P0841 code my code scanner come up with the codes PO700 and PO841. the 700 code i was told it was the input and output sensors.i had those changed a month and a haft a go. now they are back on and the po841 is on were is the 841 sensor located the machanic i go to tells me my transmission has to be replaced bu... ODB Codes Dodge Caravan 2005 P0700 and P0522 Hello I have a 2005 Dodge caravan and need a fix for these codes please.. P0700 and P0522 came up.. basically ths is stuck in limp mode or 2nd gear.. I am thinking I need a new Transmission Control module.. but can anyone confirm that... 2001 Honda Civic accord p0700 and p0740 Hi I went to get my Honda civic check and p0700 and p0740 codes came up the car has a lil leak But however the car is not slipping or anything. it's not showing no Transmission sign issues. I wanted to know what could possibly be the problem thanks you... 2005 Dodge Caravan P0700 and P0420 I have a 2005 Dodge Grand Caravan.The other day the check engine light came on.I stopped at auto parts store and they checked codes for me.P0700 and P0420 are the codes that came up.What do these mean and why did they show up?My van is running fine.Do I need a tuneup?Or is it something else?I am hop...

Read more at: http://www.obd-codes.com/p0700
Copyright © OBD-Codes.com

May 23, 2015 | 2006 Dodge Dakota

1 Answer

P0876, p0700, p0731, p0841


p0841 transmission fluid pressure sensor/switch "A" circuit range/ performance. p0876 transmission fluid pressure sensor/switch "D"circuit range performance. p0700 transmission control system malfunction. p0731 gear 1 incorrect ratio.

Aug 28, 2014 | Cars & Trucks

1 Answer

2002 dodge ram 45rfe 4x4 p0700 p0841 replaced the solenoid pack and it still throws code


Hi alfredo,P0700 means Transmission Control System (MIL Request),P0841 means Transmission Fluid Pressure Sensor/Switch "A" Circuit Range/Performance.Autel MaxiDAS DS708 Update by Internet this tool maybe can help you.

Mar 06, 2014 | Cars & Trucks

1 Answer

What is code p0841/p0700 on 2003 Chrysler pt cruiser2.4 engine


Here is the definition for code 841. It could be a solenoid - switch or other problem. The code 700 means you have a problem with the electrical system in the transmission.

P0841 CHRYSLER Description Low/Reverse (LR).

The Transmission Control Module (TCM) has detected a pressure switch open or closed at an incorrect time.
Read more: http://engine-codes.com/p0841_chrysler.html#ixzz297dkllys

Oct 12, 2012 | Cars & Trucks

1 Answer

Problems with 2001 Chrysler concord LXi: Getting code p0700 indicating there was an transmited to the PCM


If there is a driveability problem then I would worry about it. But, if there is a code saying there is a fault transmitted to the PCM but there is no other explanation, it could be a minor fault that doesn't require tearing the transmission down and rebuilding just yet.

Nov 04, 2011 | 2001 Chrysler Concorde

1 Answer

Chrysler concord 3.2 lxi 1999,speedometer does not working, cheak engine light on and the transmision does not shifting . did any one know why and how I can fixed ? Thanks


Sounds like a transmission output speed sensor. The first thing you need to do is pull trouble codes. Most likely the PCM will have a p0700 code which means there are codes in the trans control module. To scan that you will need a multifunction scan tool. You local parts store may be able to help you with that or you may need to swing buy your local shop (they usually charge for this). If the TCM code has anything to do with the rear output speed sensor than I wouldn't hesitate to replace it. These are very common in all Chrysler transmissions. It will be located on the drivers side of the transmission towards the rear of the transmission. It will have a two wire connector, is usually a light tan/cream/yellowish color, and you'll need a 1" socket or wretch to remove or install it. Good luck, let me know if you have any further questions.

Oct 01, 2011 | 1999 Chrysler Concorde

2 Answers

2003 Dodge Caravan Trouble codes p0731,p0841,p0846,p0700 Help Please.


p0731 transmission shift problems
p0841 solinoid problems in the transmission
p0846 fluid level
p0700 solinoid stuck or sticking hard shifting
there is a solinoid in the transmission that shifts the trans and downshifts when stopping this is a problem you generally don't want to do your self

Mar 03, 2010 | 2003 Dodge Caravan

1 Answer

How do I repair a problem with the code p0742?


Hey marcarhernan

This code is set when there is a variance in speed from the transmission input and output shafts. It can be a simple sensor issue or a more complex internal problem. There are several recalls for VUE transmissions but I do not think yours falls under this problem. Yours sounds more like an internal belt issue which Saturn has a technical bulletin for as shown below. This usually requires replacement of the case cover and filter and sometimes the belt depending on the damage. This is the bulletin that has to do with your code;

Bulletin No.: 04-07-30-024E
Date: June 09, 2006
TECHNICAL
Subject:
No Movement in Drive or Reverse with or without DTC P0741, P0742, P0841, P1756, P1758, or P1882 (Replace Case Cover Assembly and Filter) Models:
2002 Saturn VUE - Retrofitted with a 2003 or 2004 VT25E (VTi) transaxle (RPO M16/M75)
2003-2004 Saturn ION
2003-2005 Saturn VUE
with VT25E (VTi) transaxle (RPO M16/M75)
Supercede:
This bulletin is being revised to add additional Correction information. Please discard Corporate Bulletin Number 04-07-30-024D (Section 07 - Transmission/Transaxle).
Condition
Some customers may comment on the vehicle not moving in the "D" (Drive) or "R" (Reverse) gear selection positions. In many cases, the transaxle will also produce an audible grind or whine noise when attempting to operate in drive or reverse. The Service Engine Soon (SES) telltale may be illuminated with DTCs P0741, P0742, P0841, P1756, P1758, or P1882 set.
Cause
This condition may occur when the VT25E transaxle belt has malfunctioned.

May 14, 2009 | 2002 Saturn VUE

Not finding what you are looking for?
2002 Chrysler Concorde Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...