Question about 2001 Dodge Ram 2500 Truck

1 Answer

Adjusting headlights on 2001 dodge Ram 2500

Does anyone have a diagram showing the adjustment skrews? Also any information about which skrew needs to be adjusted to move the dim lights up would be appreciated...Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Posted on Sep 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why doesnt get spark from coil to distrubutor


replace the high tension lead from the coil. Check for cracks in the distributor cap

Jan 18, 2015 | 2006 Nissan 1400 Bakkie

1 Answer

How to change the motor on passenger window.i need to fix my window it doesn't go up.


Make sure the switch is in good condition on passenger side if its good then remove skrews of the door n remove the two caps from handle that has 2 skrews holdin it n remove door panel. Then remove skrews that are holding motor n make sure window is secured so it won't fall wen removing it. Then check by splicing wires n touchin neg wit neg n pos wit pos direct to battery to see if it works if it doesn't then its a electrical problem. Hope this helped

Jun 17, 2014 | 2001 Mitsubishi Eclipse

1 Answer

How to remove the tail light cover off??


depending on the car pretty easy, remove the inside panals from the trunk area, unskrew the lights then the light cover skrews and whala it pops right out

Apr 10, 2012 | 1994 Dodge Ram 2500

1 Answer

How do I change the drivers side headlight on an 2007 dodge ram 2500 6.7 diesel


Rise the hood remove the two assembly retaining screws then you have to pull towards the front of the truck and kind of wiggle the asembly back and forth I have the same truck and thought i would breck it but it came right out you will need to adjust the headlights when you re install

Mar 22, 2011 | 2007 Dodge Ram 1500 Quad Cab Sport

2 Answers

How do I adjust the headlights on my 2010 dodge ram 2500?


On the fender there is a hole with an arrow embossed in the metal.Use a t-20 torx driver and adjust as needed.

Nov 15, 2010 | 2010 Dodge Ram Pickup 1500

1 Answer

Jeep stalls in reverse


how is it running in park cuz if it is lower than normal adjust the idol skrew on the carb

Jun 01, 2010 | 1996 Jeep Grand Cherokee

2 Answers

Headlight replacement


On that car its pretty easy you can get a manual at any auto parts store for $15 and it will tell you step by step....as well as many other things that will help you down the road.

Nov 13, 2009 | 2005 Acura RSX

Not finding what you are looking for?
Cars & Trucks Logo

1,294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...