Question about 2004 Ford Escape

1 Answer

How do you remove a pcv valve on a 2001 ford escape v6 3.0

Posted by on

  • Anonymous Feb 26, 2009

    I have the same problem and it is not that simple to do. I can not get the valve out becouse i cant get to it even with things off

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 318 Answers

The PCV valve is at the end of a plastic or rubber hose which goes into the valve cover,, just pull it off the hose and replace with a new one.

Posted on Jan 19, 2009

1 Suggested Answer

redds55
  • 2620 Answers

SOURCE: OK i have a ford escape 2001...v6 4wd. i have

check for loose wire on the injector or clogged injector.

Posted on Apr 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 ford escape pcv valve location


On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

Dec 14, 2015 | 2009 Ford Escape

1 Answer

Pcv location ford escape 2010 2.5 gas engine


The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
The PCV valve sits in the crankcase vent oil separator.

May 16, 2014 | 2004 Ford Taurus

1 Answer

EXCESSIVE VACUUM IN CRANKCASE


So what is the problem & any question

Nov 19, 2012 | 2001 Ford Escape

1 Answer

Were is locate the pvc valve in my 2003 ford escape 3.0l xlt, the engine light is on. Tanks


Valve Cover

PCV won't set a check light,unless you have
a vacuum leak near it & it won't be the PCV

Apr 05, 2011 | 2005 Ford Escape

1 Answer

My 2001 ford escape runs fine when idling but when in drive it wont go over 20 and i have no brakes


This sounds like you have a major air leak on the engine's Induction manifold. The depression caused assists the braking system by servo assistance. The air leak will also radically decrease the engine performance too. Look under the hood and listen for a loud hissing noise. It could be a broken vacuum pipe or a defective PCV valve. If you locate a problem. repair the offending item and retest the vehicle. Hope this helps..

Mar 26, 2011 | 2001 Ford Escape

1 Answer

PCV valve failed visual inspection during smog test, but the car passed physical smog test. How to replace 2002 Ford Escape PCV valve assembly?


remove the hose to the PCV and It simply pulls out and a new one is pushed in and hose is inserted back on. It's kind of like a cork. I can not believe they check for visual inspection. Here in SC, we don't have inspections. But anyways, GOOD LUCK

Oct 03, 2010 | 2001 Ford Escape

2 Answers

How to replace pvc valve


SECTION 303-08: Engine Emission Control 2001 Escape Workshop Manual REMOVAL AND INSTALLATION Positive Crankcase Ventilation (PCV) Valve —2.0L Zetec Removal and Installation
  1. Remove the PCV valve (6A666).
    • Remove the crankcase ventilation hose (6853) from the PCV valve (6A666).
    • Remove the PCV valve from the grommet.
62777e1.gif

Dec 31, 2009 | 2001 Ford Escape

1 Answer

Location fo pcv valve on 2001 ford ranger 4 cyclinder 2.3


I think it is in the valve cover. see illustrations from shop manual.



Positive Crankcase Ventilation System Overview The Positive Crankcase Ventilation (PCV) System (Figure 132)cycles crankcase gases back through the engine where they are burned. The PCV valve regulates the amount of ventilating air and blow-by gas to the intake manifold and prevents backfire from traveling into the crankcase. The PCV valve should be mounted in a vertical position. On some applications, the PCV system is connected to the evaporative emission system (refer to the VECI decal). located on the underside of the hood or on the radiator cooling fan shroud.

crankcase ventilation tube
d176823.gif
  1. Remove the positive crankcase vent (PCV) hose from the clips.
cc83fb4.gif

Apr 17, 2009 | 2001 Ford Ranger Regular Cab

3 Answers

Where can I find the pcv valve location


please rate as fixed if this helps.

4 cylinder

SECTION 303-08: Engine Emission Control 2003 Escape Workshop Manual
REMOVAL AND INSTALLATION Positive Crankcase Ventilation (PCV) Valve —2.0L Zetec Removal and Installation
  1. Remove the PCV valve.
    • Remove the crankcase ventilation hose from the PCV valve.
    • Remove the PCV valve from the grommet by turning the valve counter-clockwise
f21fec7.gif
------------------------------

Apr 12, 2009 | 2005 Ford Escape

Not finding what you are looking for?
2004 Ford Escape Logo

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...